【正文】 這種溫度控制器 有相配套的實驗手冊，它能夠幫助學生運用正確的方法做實驗。在這個例子中，給定的溫度值為 30 攝氏度，并且溫度達到該值而沒有超越設定值和沒有出現錯誤。 ZieglerNichols 圖是用來辨認系統的一種好方法，如圖 5 所示。 實驗例子： 系統的驗證 系統的動態特性不以模型的參數特性來驗證的，而是用反應曲線的方法來進行驗證。這波形通常是用來控制 MOSFET 電源開關，這加熱器與整個設計的工作量密切相關。 模型 這一系統和先前的系統幾乎是一樣的。 PIC16F877 微型控制器符合我們的所有要求。 圖 3：溫度控制器的電路原理圖 溫度傳感器： 試驗中使用的溫度傳感器是 3 個引腳的半導體傳感器，它有一個直接與溫度相對應的輸出電壓。溫度傳感器是用低成本的半導體元件做成的，它能夠被內部的玻璃管保護。 圖 1 顯示的是數字溫度控制器的原理圖。這種單元可以直接與計算機相連接，并且由 PID 控制器，電源放大器和溫度傳感器組成。本文將詳細描述這種溫度控制器件的設計，模型和數字控制。仿真器仍然會在分析的最初水平上被使 用但是這并不能取代現實中的物理實驗。目前，像 TUTSIM，20sim， program CC， VisSim， Extend 和 MATLAB 這樣的軟件包在計算機的平臺上是非常有用的，絕大多數的大學院校都把這些軟件的花費作為其中的一項預算。Modeling and identification of a real physical process Using the ZieglerNichols tuning method Using microcontrollers in process automation Developing and experimenting with digital PID controllers. Figure 2 shows a picture of the prototype experiment kit. The kit is rather simple, consisting of only low cost materials. A round plastic container is used to store the water. The heater element and the sensor are immersed in this container. The temperature is sensed using a low cost semiconductor sensor, which is protected inside a glass tube. The heating element is the type which is used in camping and other outdoor activities in order to warm up liquid in a cup, for example for making coffee. The heater operates with 12V, draws 10A of current and provides a power of 120W. A laboratory power supply to provide such high power is usually rather expensive so a standard 350W PC power supply is used instead, costing no more than ﹩ 50 .Using a low voltage in an experimental kit has the advantage that the system is safe as there is no risk of electric shock . Fig 2: The temperature control kit Figure 3 shows the electrical circuit diagram of the kit .The circuit is rather simple, consisting of only a few parts .LM35DZ is the analog semiconductor temperature sensor , PIC16F877 is the microcontroller ,and IRL1004 is a power MOSFET switch ,used to drive the heater element . The temperature sensor The temperature sensor used in the experiment is a 3pin semiconductor sensor with an output voltage directly proportional to the temperature. The output of the sensor is connected to one of the A/D converter inputs of the microcontroller. There was the option of using a digital output sensor ,but they are usually more expensive and it was also felt necessary to use an analog sensor and teach the students the practical applications of A/D converters. The microcontroller In order to lower costs ,we needed a microcontroller with a builtin A/D converter. Process control algorithms require the use of floatingpoint arithmetic and as a result,a microcontroller with a large date memory was also required. Author requirement to lower the cost was a builtin pulse width modulated (PWM) output ,which was used to drive the heater circuitry linearly .The development of floatingpoint arithmetic routines is very plex using the assembly language and it was decided to program the microcontroller in a highlevel language which also supported the floatingpoint arithmetic. The PIC16F877 microcontroller satisfied all of our requirements. This is one of the most popular microcontrollers used in industry and it offers the following features: 8K x14 flash program memory 368 bytes RAM memory 256 bytes EEPROM memory 8x10 bit A/D converters Pulse width modulated (PWM)output Highlevel language support The FEDC piler was used for program development. This is a Windowsbased lowcost piler for the PIC family of microcontrollers. The piler offers a large number of standard C library functions, including support for floatingpoint arithmetic. The heater driver An IRL1004 power MOSFET switch is used to drive the heater element. This MOSFET can dissipate up 200W when mounted on a suitable heat sink. The heating element is connected to the drain pin of the MOSFET and the gate input is controlled from the microcontroller (see ). Large industrial temperature control systems are based on . power control techniques using thyristors and triacs and appropriate theory is given to the students on this topic. Modelling The system can be approximated to a firstorder system with a time lag. A simplified mathematical model of the overall system can be derived as described here. Mathematical model of the tank The heatbalance equation for the tank can be written as: Heat input to the system=heat increase in the system +heat losses If we let m1=mass of water inside the tank m2=mass of the water c1=specific heat capacity of the water c2= specific heat capacity of the tank Ignoring the heat loss through the walls of the tank and the heat capacities of the heater element and the mixer ,we can write the following equation Heat increase in the tank=(m1*c1+m2*c2) dtdT Heat loss from the tank= h*A*(TTa) Where Ta is the ambient temperature, A is the tank top area, and h is a constant, which depends on the surface and the ambient temperature. Thus, the heat input to the system is