techgridcg2000天花龍骨系統的材料及安裝說明-免費閱讀
【正文】 Figure 4: Finished Install Ceiling Grid Systems 圖 4：已安裝好天花龍骨系統外觀 XXXX 系 統 建 材 有 限 公 司 XXXX SYSTEMS CO. LTD. 11 Step 13: 第 十三 步： During above mention operation, all operators should properly wear the safety hat and tighten with safety belt. During moving the scaffolding, ensure there are no operator stands on the scaffolding. For the operation work up to 2m and above, safety belt should tighten hold on strong 進行以上操作時， 操作工人必須佩帶安全帽并系好 全 帶，帶手套。 XXXX 系 統 建 材 有 限 公 司 XXXX SYSTEMS CO. LTD. 6 Step 8 第八步： Repeat step 7, using 1st roll main grid as reference, installed the entire main grid according to Intersection of vertical and horizontal reference lines. 重復以上第七步，以安裝好的那一品天花 主 龍骨為中心，以縱橫基準線為軸，向四周輻射安裝。 Step 5: 第五步： Open up the ceiling tee packing, take out the ceiling tee and cross connector. Using hand drill and M8*25 allen key screw to fixed the cross connector and ceiling tee. Installation on ground only allowed for main grid. To fixed L= main grid. All installed main grid to put on another place and ensure surface of ceiling tee without any scratched. 打開天花龍骨的包裝箱，取出龍骨和十字連接件，在其中一片場地上用帶M6 六角批頭的手槍鉆將 M8 X 25 的內六角螺栓把十字連接件和龍骨連接起來，拼成一個 L= 的 天花 主 龍骨，放在另外一片場地上。 Step 2: 第二步： Check all the approved / construction drawing on site
醫療健康相關推薦
鄂ICP備17016276號-1