【正文】
的鏈接狀態 ................................................................................ 22 1 系統硬件說明 系統硬件特性 ACE 設備由如下部件組成： ? Intel Pentium 4 CPU. ? 4 個 Layer 2 Ether ports for connecting to 10Mbps, 100Mbps, or 1000Mbps works. ? Serial port. ? 前面板 ? 后面板 前面板 Figure 11 Front Panel View 接 1 前面板指示燈含義： 1 Power button with builtin power indicator. If the indicator is lit, turn the chassis power off by pressing this button. Green = Power On Amber = Standby Mode Off = Power Off 4 System ID button. This button allows you to identify the unit from its other side when it is installed in a rack with multiple devices. When pressed, the blue System ID indicator flashes on the front and rear panels of the unit. Press the front System ID button to activate the blue flashing indicator on the rear panel. Press the rear System ID button to turn off the flashing indicator. 2 Nonmaskable Interrupt (NMI) button. You do not need to use this recessed push button to trigger an NMI in normal operation. It is used for debugging. 3 Hard drive indicator (not supported). 5 System ID indicator. When the System ID button on the front or back panel is pressed, the blue System ID indicator flashes. Press the System ID button again to turn off the indicator. Note If the System ID button turns amber, this may be an indication of a system fault. In some cases, this may be a result of an internal fan failure. 6 USB port (not supported) 后面板 Figure 12 Rear Panel View 1 AC power receptacle. 12 System ID button/System status 2 PS/2 mouse port (not supported). indicator. This button allows you to identify the unit from its other side when it is installed in a rack with multiple devices. When pressed, the blue System ID indicator flashes on the front and rear panels of the unit. Press the rear System ID button to activate the blue flashing indicator on the front panel. Press the front System ID button to turn off the flashing indicator. Note If the System ID button turns amber, this may be an indication of a system fault. In some cases, this may be a result of an internal fan failure. 3 USB ports (not supported). 4 Console/serial connector 5 VGA port. 6, 7 RJ45 Ether 1 and 2 port connectors (For Future Use). 8 to 11 RJ45 Ether port connectors (numbered 4 through 1 from left to right) with 10/100/1000Mbps operation and status LE