【正文】 BSIC value, range is 0 63. ee Reason of last call release HELP display: PM RAR Ro BC CalRel  Display 3: Information of the serving cell, 1st and 2nd neighbour ++++++++++++++ +aaabbbcccddd+ +aaabbbcccddd+ +aaabbbcccddd+ + ef gh + ++++++++++++++ 1. row: serving cell information 2. row: 1. neighbour information 3. row: 2. neighbour information 4. row, ef: 1. neighbour information 4. row, gh: 2. neighbour information aaa carrier number in decimal bbb C1 value, range is 99 99, displayed only in idle mode. Instead of C1 value, letter 39。 they will send audio configure message when either display is entered by arrow keys (see for details and for remendations). The help mode is also a nonexecute mode. Display numbers have been selected in such way that no 5terminated test number is an execute display. Signal and battery levels When Field Test Display is active, normal signal and battery level bars are visible.  Reserving SIM SCM locations (remendations) When starting to use a SIMcard in a phone with field test displays, it is remended to put some default data into SIM SCM locations that are used by field test displays. This prevents accidental storing of phone numbers and names into such locations. Displays 52 and 53 also write some data to SIM SCM locations 35 and 36 overwriting any previous data. SIM SCM Remended Remended Location used location number text (name) by display 31 65535 AUD DSP 1 71 32 65535 AUD DSP 2 72 33 0 BTS TEST 17 34 34 52, 53 35 35 52, 53 36 36 52, 53 Reserving SIM SCM locations is not necessary if the user is sure that he/she will never select these displays using menu shortcut (which executes the display). In DCT3 phones it is not possible to select the SIM location number where the number and the name will be stored. So, reserving a SIM location must be done by some PC software or, for example, by DCT2 phone. 3 Information on the displays Length of a field is shown in the display picture by amount of the letters. If a value is not available, 39。x39。B39。B39。ccc39。 . is shown as 719 on the display bbbbb Charging mode 5 digit symbol xxxxx : Charger not connected or charging disabled. Charg : Charging. Maint : Maintenance charging. Faile : Failure. DisCh : Battery discharging going. InitC : EM charging is being initialized. BatCk : Battery testing is going. ChaCk : EM is checking charger. CelBr : Charging off because one or more cells broken inside battery. BSIFa : Charging off because of battery BSI measurement failed. TmpFa : Charging off because of battery NTC measurement failed. VolFa : Charging off because charger voltage measurement failed. CurFa : Charging off because charger current measurement failed. FastC : Fast charging going. FullM : Battery full and maintenance going. HotM : Battery hot and maintenance going. ColdM : Battery cold and maintenance going. TxOnC : TX on and Ni charging going. TxNoF : TX on, Ni charging going and battery is not full anymore. LithC : Charging of Lithiumion battery. LiAFu : PWM level is below the battery full limit. LiFul : PWM has been below the battey full limit for a certain time that is specified for battery full. LiTxO : TX on and Li charging going. LNFTx : TX on, Li charging going and battery is not full anymore. ColdC : Cold charging. I_Che : Init checks。ccc39。F39。B39。 39。 Activating the Field Test Display The Field Test Display is located at the end of the main menu loop. It is activated as follows: press the Menu button scroll in the main menu loop to field test display item (NETWORK MONITOR) press the Select button enter the index number of the test to be activated at the TEST NUMBER prompt confirm with the Ok button The field test data will then appear in a moment. The index number of the test will appear in the top right corner of the display. If given test number is not valid No Test text will appear to the display. A quicker way to activate the Field Test Display is to use the menu shortcut. The field test display is the last item in the main menu loop. The shortcut activation of the field test display is done in the following way: MENU number of the last item number of the desired fi