brocade san交換機操作手冊及常用命令-全文預覽
【正文】 tion for ports on the specifiedswitch: Module type The SFP type if an SFP is present. Port speed The speed of the Port (1G, 2G, 4G, N1, N2, N4, or AN). The speed can befixed, negotiated, or autonegotiated. Port state The port status. Comment About the port. This section may be blank or display the WWN for an F_Port oran E_Port, the trunking state, or upstream or downstream status3. portShow查看端口狀態switch:admin switch:user portshow 0portName:portHealth: OFFLINEAuthentication: NoneportDisableReason: NoneportCFlags: 0x1portFlags: 0x4001 PRESENT U_PORT LEDportType: portState: 2 OfflineportPhys: 2 No_ModuleportS: 0port generation number: 0portId: 010000portIfId: 43020020portWwn: 20:00:00:60:69:00:02:53portWwn of device(s) connected:Distance: normalportSpeed: N2GbpsLE domain: 0Interrupts: 0 Link_failure: 0 Frjt: 0Unknown: 0 Loss_of_sync: 0 Fbsy: 0Lli: 0 Loss_of_sig: 0Proc_rqrd: 0 Protocol_err: 0Timed_out: 0 Invalid_word: 0Rx_flushed: 0 Invalid_crc: 0Tx_unavail: 0 Delim_err: 0Free_buffer: 0 Address_err: 0Port part of other ADs: Yes4. fanShow查看交換機散熱風扇的狀態Enter the fanShow mand:switch:admin fanshowFan 1 is OK speed is 7010 RPMFan 2 is OK speed is 7180 RPMFan 3 is OK speed is 7068 RPMFan 4 is OK speed is 7116 RPMFan 5 is OK speed is 7155 RPMFan 6 is OK speed is 7001 RPMswitch:admin5. psShow查看交換機的電源狀態注：如果安裝FR418i、FC416IP、FC10FC848板，需要滿配4個電源Enter the psShow mand:switch:admin psshowPower Supply 1 is OK0335,FF2Z0007161,60000073902, B,DCJ300201P, B,FF2Z0007161Power Supply 2 is faulty0335,FF2Z0007176,60000073902, B,DCJ300201P, B,FF2Z0007176switch:admin6. tempShow查看交換機的環境溫度Enter the tempShow mand:switch:admin tempshowIndex Status Centigrade Fahrenheit1 OK 21 702 OK 22 723 OK 29 844 OK 24 755 OK 25 77switch:admin7. errDump、errShow、errClear查看交換機的內部消息日志To display the system message log, with no page breaks Enter the errDump mand.To display the system message log one at a time Enter the errShow mand.To clear the system message log Enter the errClear mand.8. supportShow、supportSave、pdShow收集交換機的診斷數據supportShow 顯示診斷信息和狀態信息supportSave將數據打包、上傳至指定的FTP服務器The mand prompts for an FTP server, packages the following files, and sends them to the specified server:? The output of the supportShow mand? The contents of any trace dump files on the switch? System message logs (for Brocade directors, supportSave saves the system message logsfrom both of the CP blades)pdShow 顯示panic dump文件的內容，幫助診斷系統panic的原因9. nsSho
公司管理相關推薦
鄂ICP備17016276號-1