外文翻譯-基于c8051單片機的雙相信號發生器軟件設計-單片機-全文預覽
【正文】 gnal generator, which uses a frequency selective circuit to generate sine vibration, to obtain the necessary frequency. But can also Synthesis technology to obtain the necessary 9 rate. Frequency of use of technology into the signal generator, often referred to as synthetic signal generator. 3 The implementation methods of signal generator The realization of the function signal generator method usually have the following kinds: (1) the ponents with division: it is usually function generator single function generator and frequency is not high, its work is not very stable, not easy debugging. (2) can be made by the transistor, the opamp IC etc, more universal device is made with special function signal generator IC produce. Early function signal generator IC, such as L8038, BA205, XR2207/2209 etc, the functions of them less, precision, frequency cap 300kHz, unable to produce only higher frequency of signal, adjust the way also not enough flexibility, frequency and occupies emptiespared to cannot independent regulation, both affecting each other. (3) use monolithic integrated chip function generator: can produce various waveform, achieve the high frequency, and easy to debug. In view of this, the American beauty developed a new generation letter ICMAX038 function signal generator, it overes the (2) chip shortings, can achieve higher technical index, is the chip deficits. MAX038 frequency and high accuracy, good, therefore it is called a highfrequency precision function signal generator IC. In PLL, vco, frequency synthesizer, pulse width omdulatros etc circuit design, selection of devices are MAX038. Author: , Nationality: British Source: : / / / download / file2020 1 關于傳統信號發生器的簡介 (譯文 1)摘要 在 21 世紀的今天，信號發生器獲得了廣泛的應用和快速的發展信號發生器作為電子技術領域中最基本的電子儀器，廣泛應用于航空航天測控、通信系統、電子對抗、電子測量、科研等各個領域中。隨著通信和雷達技術的發展， 40年代出現了主要用于測試各種接收機的標準信號發生器，使信號發生器 從定性分析的測試儀器發展成定量分析的測量儀器。 自 60 年代以來信號發生器有了迅速的發展，出現了函數發生器，這個時期的信號發生器多采用模擬電子技術，由分立元件或模擬集成電路構成，其電路結構復雜，且僅能產生正弦波、方波、鋸齒波和三角波等幾種簡單波形，由于模擬電路的漂移較大，使其輸出的波形的幅度穩定性差，而且模擬器件構成的電路存在著尺寸大、價格貴、功耗大等缺點，并且要產生較為復雜的信號波形則電路結構非常復雜。 2 信號發生器的分類 隨著現代電子、計算機和信號處理等技術的發展，極大促進了數字化技術在電子測量儀器中的應用
畢業設計相關推薦
鄂ICP備17016276號-1