【正文】 風格和應答器是采用的過程。 子機的溫度、濕度和二氧化碳的硬件模塊主要是完成讀取 I2C濃度的二氧化碳濃度、溫度和濕度，測量數據和電流控制上傳狀態到主機電腦，接受模糊控制指令從主機輸出執行指令。這個配置軟件具有可靠性高，開發周期短，完美的圖形 界面生成能力，以及友好的人機交互，可以按照創建動態圖像和圖表可以直觀地顯示設備的布局場景中的參數，控制狀態的變化，并能發出報警信號，當超過額定值，可以實現模糊控制的溫室參數使用的特定數據庫中存儲的歷史環境參數曲線并采用農業專家系統。 在這個系統中，分區節點為了簡化控制、灌溉技術，采用控制土壤水分技術。 以同軸傳輸線作為無損耗均勻線，波阻抗為 Z0， ZL 是負載阻抗。然后，ε≈ε∞，虛部的土壤波阻抗忽視，只有真正的一部分，這相當于一個純電阻。ε是介質的介電常數，λ是介質電導率 。輸出電路包括光學隔離、信號驅動，輸出繼電器。它的測量范圍為 0?202100 勒克斯 。 0％ RH，溫度測量精度為177。 新的智能傳感器 SHT11 基于選擇 CMOSens 技術 測量溫度和濕度。 ，照明度和 CO2濃度 每個控制單元包括供應鏈管理（ SCM），傳感器，信號處理電路， RS485 接口和輸出環節。 在這種分布式系統中，通信是關鍵。 在秦皇島農村大棚。下部是由一系列不同功能的模塊，并且在每個模塊中，一個單一的芯片作為下位機采用 AT89C52， RS485 則用于與所有 AT89C52 PC 進行通信，然后實現收集，處理和控制的溫室參數。 二，系統結構及原理 最顯著的特點是分配和智能控制系統溫室相結合，這將作為一個整體，模塊組合結構簡單，方便的人機交互與數據采集，控制和管理，并采用模糊控制技術的智能專家，可以組成適應多種作物管理控制的溫室。近 10 年的不懈努力，我們的研究團隊在農業環境參數的測量和控制系統上，設計了一個智能測量和控制系統相分布結合的溫室，可以在廣大農村地區適用。每個監測和控制模塊包括 STC12 系列的微控制器、傳感器、繼電器等等。can visually display the changes of parameters,control status,and can give an alarm when overlimited。ε is medium dielectric constant。spectral range is 400~700(nm) visible light。and considering the operation of configuration software,it is required that memory is 64M or above and hard disk is 10Gb or above. B. The control modules of temperature and humidity,illuminance and CO2 concentration Each control unit consists of SCM,sensors,signal processing circuit,RS485 interface and output hardware structure of module of temperature and humidity,CO2 concentration is shown in . CO2 concentration is measured by sensor based on NDIR technology,measurement is of 0~2 the sensor,control system,by software of digital filter,linear interpolation and temperature pensation,the CO2 concentration is output as digital adhered to UART protocol,and then is input directly to the SCM. The new intelligent sensor of SHT11 based on CMOSens technology is chosen in the measurement of temperature and SHT11,the temperature and humidity sensors,signal amplification,A/D,I2C bus are all integrated in a chip。 the lower is posed of a series of modules of different function,and in each module,a single chip of AT89C is adopted as the lower machine,RS485 is used to municate PC with all AT89C,and then the collection,processing and control of the greenhouse parameters is function module is pletely isolated in electrical,any failure on the nodule does not produce any effect on other system collects separately ways of environment information through each monitoring and control module,and sends it to host PC through the RS485 in the PC configuration control system,the acquired parameters are pared with the values of setting,then according to a variety of expert intelligent fuzzy control system of crops at different growth stages,the fuzzy control instructions on the environment temperature,humidity,CO2 concentration,soil water content and the corresponding operation instructions or alarm are given. The system is applied in rural greenhouses in at 1/4 near East and West end in a greenhouse,and at the height of from the ground in the middle in the northern half (near the wet curtain) and the southern half (near the fan ),a module of air temperature and humidity ,CO2 concentration and a module of soil moisture content are set。and of PC,it has a large amount of data storage,rich software,convenient humanputer interaction,and so we use outdated and lowpriced PC,taking the PC as the upper machine,taking the different function control modules posed of multiple microputers as the lower machines,then a masterslave distributed and intelligent control system bases on microputer is made up,by which both better monitoring and control,display and data collection or management are achieved,but also lower cost of system is get according to the actual need. II SYSTEM STRUCTURE AND PRINCIPLE The most marked fea