【正文】 pulates. According to 2021 national economy trade mittee promulgation of electric power profession standard 《 electric power system safety stability lead 》 middle finger: standard is under the normal movement method of the any ponent(is like circuit, generator, and transformer...etc.) in the electric power system have no break down or because of break down break to open, electric power system should Can keep stable to circulate with normal power supply, other ponents however carry, electric voltage and frequency all are allowing inside the is usually called N. one standard. The charged barbed wire power supply safe standard has:Nl standard and quasi N one 2 standards and Ns is one 2 standards. City39。 外文文獻二 The most basic request that charged barbed wire in the city circulates is safe and core problem of charged barbed wire safety in the city stability wants to build up to be a with the city mutually acmodative of, reasonable of charged barbed wire text passes and programs to the charged barbed wire with electric power and designs the technique principle of the aspect the standard concerning electric voltage grade, power supply credibility, power supply ability and charged barbed wire safe power supply requests etc. some problems that should notice in the charged barbed wire safety。目前，國內外已經研制出以 32 位數字信號處理器為硬件基礎的保護、控制、測量、及數據通信一體化的微機保護綜合控制裝置，并將一些人工智能技術引入繼電保護中，如用人工神經網絡、模糊理論實現故障類型判斷、故障測距、方向保護、主設備保護等新方法。戶外插接式智能型組合電器是一種功能更完備的高壓和超高壓開關系統，它內含電氣一次、二次設備，以及相關連的插接式復合光纜等。采用 GIS 的情況下，優先采用單母線分段接線。由于電能無法大量儲存，必須保證用電和電能生產的平衡。 substation and the construction area covers an area of reduced substation program to simplify wiring, switchgear, bus and steel pipes, such as the use of stents to substation layout is more simple, the abolition of the former station area and optimize the layout to make a substantial decline in an area substation. With technological advances, the traditional relay protection devices are gradually being replaced by microprocessorbased protection. Microprocessorbased protection is referred to as the protection of PC puter, a digital relay protection, is based on the programmable digital circuit technology and realtime digital signal processing technology of the Power System Protection. At present, both at home and abroad have been developed to 32bit digital signal processor for hardwarebased protection, control, measurement, and data munications integration of microprocessorbased protection control devices, and artificial intelligence technology into a number of relay protection, such as artificial neural works, fuzzy theory to determine the realization of fault type, fault location, the direction of protection, the main equipment and other new methods of protection. By means of wavelet analysis of the theory of digital signal failure of the entire frequency band information and to achieve fault detection. These artificial intelligence technology to improve the accuracy of failure to provide a means of identification, but also some singlefrequency signal based on the traditional method difficult to identify the problems to be resolved. At present, the microprocessorbased relay protection is along the microprocessorbased protection work, and intelligent, adaptive and protection, control, measurement, signal, data munications integration direction. 譯文： 變電站是電力系統中不可缺少的重要組成部分，它擔負著電能轉換和分配的任務，對電網的安全和經濟運行起著舉足輕重的作用， 是聯系發電廠和用戶的中間環節 。隨著電力人不斷的努力，變電站的設計一定會不斷完善的。 [19]110kV電力網絡和變電站在系統中的地位和功能發生了很大變化。[2] 如果上面所述的部分我們都能夠很好的綜合考慮那么變電站的初步設計就會相對來說比較安全經濟。我國經濟的發展也電力帶來了很多問題比如： 對電能的需求日益增長，城市和農村用電密度每天都在變化，所以給變電所的容量設計帶來了很多麻煩。 [7] 鑒于其在系統中的重要性，有如下要求：（ 1）選擇性，即僅將故障元件從系統中切除，保證非故障元件正常運行，提高系統供電可靠性；（ 2）速動性，快速地切除故障元件可以提高系統并列運行的可靠性，減少用戶在電壓降低的情況下的工作時間，以縮小故障元件的損壞程度。此時，繼電保護就顯的很重要。這樣就可以避免由于低壓線路故障率較高 所引起的所內停電事故，從而保證變電所的不間斷供電。首先應根據變電所電氣設備的總平面布置圖確定，避雷針的初步選定安裝位置與設備的電氣距離應符合各種規程范圍的要求，初步確定避雷針的安裝位置后再根據公式進行，校驗是否在保護范圍之內。 （ 8） 110— 220KV 線路側一般不裝設避雷器。 2） 直接接地系統中，變壓器中性點為 全絕緣，但變電所為單進線且為 單臺變壓器運行時。 （ 2）旁路母線上是否需要裝設避雷器，應視在旁路母線投入運行時，避雷器到被保護設備的電氣距離是否滿足要求而定。對非直接接地系統，依具體要求按兩相或三相配置。 [15] （ 4）當需要在 330KV 及以下主變壓器回路中提取電壓時，可盡量利用變壓器電容 式套管上的電壓抽取裝置。電壓互感器的配置應能保證在運行方式改變時，保護裝置不得失壓，同期點的兩側都能提取到電壓。 [11] （ 2）在出線上裝設電抗器的 6— 10KV 配電裝置中，當向不同用戶供電的兩回 線共用一臺斷路器和一組電抗器時，每回線上應各裝設一組出線隔離開關。 SF6斷路器和真空斷路器的檢修周期可長達 20年，在變電所中選用了 SF6斷路器和真空斷路器后，斷路器檢修幾率大為減少，提高單回線路供電可靠性的根本措施轉變?yōu)榻ㄔO(shè)第二供電回路．因為在單回線路供電情況下中斷供電的主要因素已經是線路故障．而不是斷路器檢修。 [8] 如上所述，各種電器對我們的變電站設計都有至關重要的作用。 （ 6）電壓互感器 將高電壓變換成低電壓，供計量和繼電保護用。 （ 4）高壓熔斷器 在過負荷或短路時，能利用熔體熔斷來切除故障。負荷開關只有簡易的滅弧裝置，其滅弧能力有限。 變電所主要電氣設備及其作用： （ 1）高壓斷路器（或稱高壓開關）線路正常時，用來通斷負荷電流；線路故障時，用來切斷巨大的短路電流。在當今的技術環境中，隨著新技術、高質量電氣產品廣泛應用，在某些條件下采用簡單主接線方式比復雜主接線方式更可靠、更安全，變電