可燃性氣體檢測與報警系統的外文翻譯--使用無線的可燃?xì)怏w檢測系統的設計(文件)
【正文】 SPI接口。4) when TRX_CE pin is set low, means the data transmission pleted and nRF905 enter idlemode.4）當trx_ce引腳設置低，意味著數據傳輸完成，進入idlemode nRF905。5) MCU set TRX_CE to 0, and nRF905 enter to idle mode.5）設置為“0”trx_ce單片機和nRF905，進入空閑模式。工具書類【1】劉氏，陳王Q，H G，吃。[3] Liu Wei, Chen HeXin， Zhang JunWei，etc. Intelligent control and alarm system based on[ 3 ]劉薇，陳合新，張瑋， TC35i。流量測量?jī)x表，2005,16（3）：135144。圖6無線數據傳輸?shù)牧鞒虉D圖7無線接收數據流程圖 摘要設計了一種檢測可燃?xì)怏w濃度的裝置，具有無線收發器功能，可以發送報警信息到用戶的移動迅速通過GSM實驗結果表明，該裝置具有較高的精度，穩定性和可靠性。3）當nRF905接收相匹配的地址，地址匹配引腳將被設置高。2）微控制器設置trx_ce = 1和tx_en = 1刺激shockbursttm nRF905發送方式。municationsmode是8位異步一個起始位，8位數據位，1位停止。天線部分50Ω單端天線。在系統中，利用溫度傳感器DS1820采集溫度信號，和用于溫度校正軟件的方法。運算放大器連接一個電阻R7和調節D1的電壓跟隨器組成的穩壓電路為橋式供電。硬件設計信號采集和調理電路；圖2顯示了數據采集電路。為了提高測量精度，降低了溫度的影響，設計了溫度補償電路采集溫度數據。主控部分主要完成數據接收，顯示和報警信息。無線通信技術在氣體檢測領域的應用，可以解決在特殊環境下的遠程監控問題，如高溫，低溫，有毒氣體無法布線。與無線通信模塊TC35i模塊和GSM網絡平臺，我們可以發送報警信息到用戶的移動迅速。主的任務是接收數據并通過LED顯示。3) Beacause of AUTO_RETRAN being high, the data of nRF905 is constantly reissued untilTRX_CE=0.4) when TRX_CE pin is set low, means the data transmission pleted and nRF905 enter idlemode.Wireless receiving program. NRF905 data receiving process is as follows:1) When TRX_CE = 1 and TX_EN = 0, nRF905 enters ShockBurstTM receive mode checking constantly and waiting for receiving data.2) When nRF905 detect the carrier having same frequency band, the carrier detect pin will be set high.3) When nRF905 receive a matched address, the address matches pin will be set high.4) When packet correctly received, the word head, address and CRC bits will automatically beremoved, and the data ready pin will be set high.5) MCU set TRX_CE to 0, and nRF905 enter to idle mode.6) When all the data received, nRF905 set data ready pin and address matching pin to 0, andnRF905 turn to shutdown mode or ShockBurstTM transmitmode and receive mode. Wireless data transmission flow chart Wireless data receiving flow chartSummaryDesigned an equipment to detect the concentration of bustible gas, which has wireless transceiver functions and can send the alarm information to user’s mobile promptly through results show that the devices have high precision, stability and reliability. It can meet most applications which need realtime monitoring of bustible gas concentration.References[1] Liu S, Chen Q, Wang H G, eat. Electrical capacitance tomography for gas so
環評公示相關推薦
鄂ICP備17016276號-1