基于plc控制的火災自動報警系統設計-wenkub
2022-11-28 21:21:25 本頁面
【正文】 6 本章小結 ....................................................................................................18 第 5 章 火災系統設計 ......……………………………………………………… 19 區域報警控制系統 .............…………………………………………… 19 集中報警控制系統 ………………………………………………… . ....20 控制中心報警系統 ………………………………………………… . ....23 本章小結 ..................................................................................................24 第 6章 火災自動報警系統設計 ...........................................................................25 建筑狀況 .................................................25 防火區的劃分 .............................................26 探測區域和報警區域的劃分 .................................27 溫度傳感器選型與安裝 .....................................28 plc 的選用 ................................................29 樓道消防 plc 控制系統設計 ..................................29 消防聯動設計 ..............................................32 消防聯動控制設備的組成 ................................33 消防聯動控制系統的設計 ................................33 本章小結 ..............................................34 第七章 結束語 ………………………………………………………………… ........35 致謝 ......................................................................................................35 參考文獻 ...............................................................................................35 摘 要 本文從 SnO2 半導體氣敏傳感器、差動式溫度傳感器和 plc 的工作原理出發 ,通過對高層建筑的安全設施的缺陷分析，以 plc 的特點為例，采用 A/D、 D/A 轉換的方法建立模擬量控制。討論溫度傳感器的分類及可編程控制器的發展歷史、特點、結構及基本原理。火災自動報警系統利用非常的廣泛、報警的準確率高。 可編程控制器 Abstract This paper from the working principle of SnO2 semiconductor gas sensor,differential temperature sensor and PLC starting, through the defect of safety facilities of the highrise building analysis, with the characteristics of PLC as an example, the establishment of analog control method using A/D, D/A order to further improve the automatic fire alarm system, based on the analysis of SnO2, the temperature sensor working mode, using PLC to control theautomatic fire alarm system. Plc in the sensor are constructed on the basis of thesystem slightly temperature detection system, semiconductor gas sensitive PLC according to work instruction on the safety status of highrise building monitoring,data acquisition and processing of the sensor, the processing result to the PLCthrough the RS232 munication line, by the PLC
研究報告相關推薦
鄂ICP備17016276號-1