防爆帶掛鉤成型機機械系統設計說明書-wenkub
2022-08-31 07:17:34 本頁面
【正文】 64cm防爆帶成形機的設計，研制一種專門適用于顯像管防爆帶產品成形的設計開發，此設計的目的和意義主要是解決傳統的人工上料，去料問題，采用傳輸裝置全自動送料，減少人工壓緊工件，勞動強度大，安全可靠性差及模具容易損壞等問題，避免工傷事故；其次是在滿足沖孔折彎精度的條件下節省原材料及成本，使防爆帶成形機生產的產品具有優質、高效、節能、節材、成本低等顯著特點。目前電視機和計算機的顯示器都在向大屏幕發展，由于顯像管的重量是和屏幕尺寸的3次方成正比。 14167。 9167。 8167。 5167。 研究方法 2167。s explosionproof belt is formed on the basis of the problems exist in mechanical, according to the requirements of parts operating, design a kind of using hydraulic transmission system for the power of the explosionproof belt forming machine. The forming machine utilizes the side stamping to carry on the bending processing to the hook. The explosionproof zone is widely used in various imaging screens, so as to prevent the explosion of the picture tube, thus avoiding all kinds of safety hazard.. Its explosive proof belt forming machine is mature, simple in structure, low in manufacturing cost, and wide range of products..In explosionproof belt forming machine design, first of all, for explosionproof belt belt material selection and forming process analysis and design of suitable mechanical structure according to and select suitable machining process。其防爆帶成形機設計成熟、結構簡單、制造成本低廉，產品應用范圍廣。本 科 畢 業 論 文設計題目： 防爆帶掛鉤成型機機械系統設計 摘要在研究國內外防爆帶成形機的發展狀況和我國防爆帶成形機械存在的問題基礎上，根據零件作業的要求，設計一種利用液壓傳動系統為動力的防爆帶成形機。在防爆帶成形機設計方案中，首先，根據對于防爆帶帶料的選擇及成形工藝的分析等設計出合適的機械結構，并選擇合適的加工流程；其次，針對彎曲的需要，計算各零件的力學性能，在設計該成形機的同時結合了原有的機械設計的方案，對原有的機械設計進行改進和創新。 secondly, in view of the need for bending, calculate the mechanical properties of the parts and in the design of the forming machine bined with the original mechanical design scheme, to the original design of the machine for improvement and innovation. In the design, the CAD technology is cited.. Key words: explosionproof belt forming machine hydraulic transmission system lateral stamping bending processing 1167。 技術路線 22. 防爆帶產品的零件圖 2167。 5167。 8167。
環評公示相關推薦
鄂ICP備17016276號-1