配置cisco2500系列訪問服務器-wenkub
2023-06-12 00:51:27 本頁面
【正文】 e listed with OK? value NO does not have a valid configuration Interface IPAddress OK? Method Status Protocol Ethernet0 unassigned NO not set up down Serial0 unassigned NO not set down down Serial1 unassigned NO not set down down 步驟選擇你的Ethernet或Token Ring接口上支持的協議。SNMP定義一組功能可用于監控網絡的基礎。如果你要使用IP路由，你還必須選擇一個內部路由協議。訪問服務器上的異步口被配置成允許用TTY設備、遠程結點和遠程LAN連接很多種設備都可以用異步線路連接到訪問服務器。步驟鍵入或按回車配置異步線路：Configure Async lines? [yes]: 步驟為異步線路設定線路速率和流量控制。步驟在下面的例子中，系統正在對一個使用IP協議的Ethernet LAN配置：Configuring interface parameters: Configuring interface Ethernet0: Is this interface in use? [yes]: Configure IP on this interface? [yes]: IP address for this interface: Number of bits in subnet field [0]: 8 Class B network is , 8 subnet bits。Configure AppleTalk on this interface? [no]: yes Extended AppleTalk network? [no]: yes AppleTalk starting cable range [0]: 1 AppleTalk ending cable range [1]: 2 AppleTalk zone name [myzone]: AppleTalk additional zone name: otherzone AppleTalk additional zone name: 步驟決定你是否要在此接口上授權IPX,鍵入唯一的IPX網絡號。 mask is Configure AppleTalk on this interface? [no]: yes Extended AppleTalk network? [yes]: AppleTalk starting cable range [2]: 4 AppleTalk ending cable range [3]: 4 AppleTalk zone name [myzone]: ZZ Serial AppleTalk additional zone name: Configure IPX on this interface? [no]: yes IPX network number [2]: B002 鍵入異步口地址在配置好異步線路并選擇了路由協議之后，為每一個異步口鍵入IP地址。如果你回答yes，這個配置將被輸入并保存在啟動配置中。如果你還想在初始的配置之后修改參數，鍵入命令setup。用到同步口時路由器的設置舉例：第一步:以太口IP地址的設置第二步:同步口IP地址的設置第三步:路由表的設置ROUTERSHOW CONFIG Using 516 out of 32762 bytes!version service udpsmallserversservice tcpsmallservers!hostname Router!enable secret 5 $1$VKgd$JXtJ6VeM7uCSEUP6y6xDZ0enable password kaifeng1!!interface Ethernet0 ip address !interface Serial0 ip address no fairqueue!interface Serial1 no ip address shutdown! no fairqueue!interface Serial1 no ip address shutdown!router rip network network network !no ip classless!line con 0line 1 8line aux 0line vty 0 4 password kaifeng2 login!endRouterping Type escape sequence to abort.Sending 5, 100byte ICMP Echoes to , timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), roundtrip min/avg/max = 36/38/40 msRouterping Type escape sequence to abort.Sending 5, 100
公司管理相關推薦
鄂ICP備17016276號-1