【正文】
oncrete requirement: 混凝土標號為 C30。 2 cm; 含氣量在 177。 混凝土泵車的運輸時間不應超過 40 分鐘,攪拌車之間的時間間距不應超過 10 分鐘; Transport time of concrete pumping truck should not exceed 40 minutes。 其他為注明事宜,根據乙方的配比; Others undertake according to party B’s concrete mix design. b. 鋪筑前擬定計劃,并審核; Make a scheme and certificate before concrete cast 混凝土鋪筑是影響混凝土品質的主要環節,因此必須事先擬定好計劃,并得到項目監理的認可; Concrete casting is the most important part through the entire construction process which can influence the quality of concrete directly, so a scheme must be wellprepared in advance and certificate by project monitor. 擬定混凝土鋪筑計劃時需考慮的事宜: Matters below must be taken into account when a concrete casting scheme is drafted: * 現場混凝土輸送通道及 設備進出的通道。 Concrete casting direction should be one in principle (usually start from the left, and move to the right direction, and repeat it when one strip is finished). 夏天鋪筑時避免發生施工縫,為了防止發生冷縫,與商混公司協商,避免水泥泵車延遲的情況發生。在要求超平工業地坪的今天,激光整平機尤為 重要。進行打磨時,注意避免過度打磨,直到水滯不見為止。 It include two FNumbers: FF for flatness and FL for levelness. 平整度 FF:以 30cm 為間距,測出的地坪凹凸變化的合計。 In the project Macquarie Goodman (Shanghai) Warehousing Co., Ltd. Newlybuilt Plant Phase I and II (built area 58,000m2, contract price million, singlelevel steelwork) a flat steel fiber floor is required and acplished with laserguided screeding machine and doubledisc polisher. The finished floor is inspected and approved by a professional testing pany and is in line with the ER (. 3m and 3mm, FF50 and FL30 standards). 工程實例照片: Sample Pictures 激光整平機整平地坪砼 Laser Screeding Machine in Operation 地坪平整度檢測 Floor Flatness Testing 鋼纖維地坪成品 Finished Steel Fiber Floor 。 Levelness FL: variations tested over t