gc-hx503中英文混合說明書-wenkub
2023-05-21 13:19:31 本頁面
【正文】 n is released, white balance is locked. “10” “11” 8 LENS VSD DC LL INT AC24 LEVEL VPH VIDEO “8” “9” GND “1” “2” “3” “4” “5” “6” “7” UP DOWN PUSH LOCK 4 5 6 0 1 2 3 7 8 9 0 4 5 6 0 1 2 3 7 8 9 0 Flange back focus adjustment 1. In case of fixed focus lens a. Loosen the locking ring and set the focus ring of lens to infinity ( ∞ ) . b. Tune the mount ring to get a clear picture( distance from camera to object is more than 23m) and fasten the locking ring. 2. In case of zoom lens a. Loosen the locking ring and set the lens to the maximum telephoto position. Then turn the focus ring to focus. ? in the case of Auto iris lens, shoot a paratively dark object or reduce the ambient light so that the Iris is fully open. b. Set the lens to its maximum wide angle position, and set the focus. c. Repeat step a and b, until the difference between focusing position a and b is smallest. D. When the best focusing point is found, fasten the locking ring. 7 3. 接口 “ 4” 數(shù)據(jù)傳輸接口。K~8,000 186。K ) ? Control : Flickerless, Back light pensation , AGC , Manual shutter control, Maximum Sensitivity select, Auto white Balance/ Indoor/Outdoor/Fluorescent light/ BMB Level 3 4 Installation Mounting a Lens 1. Remove the protective cap in front of the camera. 2. Confirm the mount ring whether it is for C or CS. * Caution1 3. Attach the lens to the lens mount ring. 4. If the lens has an Auto Iris mechanism, connect the iris cable to the Lens connector (EE/VSD S/W must be set to VSD on the side of the camera) A. In the case of having no iris amplifier : Set the slide switch to DC (Down side) B. In the case of having iris amplifier : Set the slide switch VSD (Upper side) C. Set the S/W on the side of the camera to DC or VSD, too. ? If using lens that has iris amplifier, “LEVEL” and “ALC” volume of lens must be adjust carefully. It may cause any hunting. ? When connecting Auto iris lens, be sure to use the connector to be remended by manufacturer. (E4191, Chuo Musen, Japan) * Caution 1 : This appliance is set to CS mount default. If you want to use C mount lens, fix a C adapter ring additionally packed in the box. 5 當使用自動光圈鏡頭時 ... 視頻驅(qū)動自動光圈鏡頭接線圖 1 2 3 4 ① ③ ④ ② 1. 電源 (12V)
公司管理相關(guān)推薦
鄂ICP備17016276號-1