【正文】 Redback SE800設備操作手冊日常檢測主要是對設備的工作環境、硬件工作狀態、軟件工作情況、設備當前工作性能等進行檢測，確保及時發現問題消除事故隱患。一、硬件對設備工作環境的溫度、濕度進行、供電、設備通風等進行檢查確認環境不影響設備的運行及設備安全。 800 Status LEDs（SE800機框狀態指示燈） Label名稱Activity有效狀態Color顏色Description描述PWR AOn亮Green綠The Aside .48 VDC power source is presentA路48伏交流電電源通電正常；Off滅None無The Aside .48 VDC power source is absentA路48伏交流電電源沒有通電PWR BOn亮Green綠The Bside .48 VDC power source is presentB路48伏交流電電源通電正常；Off滅None無The Bside .48 VDC power source is absentB路48伏交流電電源沒有通電FAN風扇On亮Red紅A failure condition exists on the fan and alarm unit.告警單元或者風扇存在故障信息； 800 Alarm LEDs（機框告警指示燈）：Label名稱Activity有效狀態Color顏色Description描述ACOOn亮Yellow黃An audible alarm condition exists but the audible alarm has been silenced.一個聲音告警，但是該告警已經被靜音；Off滅None無There is no audible alarm condition or the audible alarm has not been silenced.沒有聲音告警，或者聲音告警沒有被靜音；CRITICALOn亮Red紅One or more critical alarms exist on the chassis.機框存在一個或多個嚴重告警；Off滅None無 No critical alarm exists on the chassis.機框沒有嚴重告警；MAJOROn亮Red紅One or more major alarms exist on the chassis.機框存在一個或多個主要告警；Off滅None無 No major alarm exists on the chassis.機框沒有主要告警；MINOROn亮Red紅One or more mino alarms exist on the chassis.機框存在一個或多個次要告警；Off滅None無 No minor alarm exists on the chassis.機框沒有次要告警； LEDs on Controller Cards（控制卡設備指示燈）Label名稱Activity有效狀態Color顏色Description描述FAILOn亮Red紅A failure exists on the controller 控制卡存在一個故障；Off滅NoneNo failure exists on the controller card.控制卡沒有故障；ACTIVEOn亮Green綠This controller card is active and is providing or capable of providing service.控制卡處于主用狀態，功能可用Off滅NoneThis controller card is either on standby (the STDBY LED is lit) or has failed (the FAIL LED is lit).控制卡工作在備用狀態或者卡有故障（FAIL燈亮）；STDBYOn亮 Yellow黃his controller card is the standby controller for the system.控制卡處于備用狀態；Off滅NoneThis controller card is either the active controller for the system (the ACTIVE LED is lit) or has failed (the FAIL LED is lit).控制卡處于主用狀態（active 指示燈亮）或者卡故障（fail 指示燈亮）；CF卡指示燈ACTIVEBlinkingGreenThe externalstorage device in the slot in the active controller card is being read or written閃爍綠主用控制卡上的外部存貯器CF卡正處于被讀或被寫狀態；Off滅None無No read or write operation on the external storage device is in progress.外部存貯器目前處于非讀寫狀態FAILBlinking閃爍Red紅Standby controller is being synchronized with the active controller.表示主備控制卡數據庫正在進行同步 LEDs on Ethernet and Gigabit Ethernet Cards（四端口GE卡設備狀態指示燈）：Label名稱Activity有效狀態Color顏色Description描述FAILOn亮Red紅A failure exists on the card.卡有故障Off滅NoneNo failure exists on the card.卡正常ACTIVEOn亮Green綠This card is active.卡處于工作狀態Off滅NoneThis card is not active.卡沒沒有被激活； LEDs on Gigabit Ethernet Cards（四端口GE卡功能指示燈）：Label名稱Activity有效狀態Color顏色Description描述ACTOn亮Yellow黃The Gigabit Ethernet link is transmitting or receiving frames端口正在發送或接收數據Off滅NoneThe Gigabit Ethernet link is not active.沒有數據傳送發生LNKOn亮Green綠The Gigabit Ethernet link is up.端口鏈路互通成功；Off滅NoneThe Gigabit Ethernet link is down.端口鏈路互通失敗二、軟件查看軟件版本、軟件文件名及存儲位置、配置文件保存、系統性能等。常用命令如下： version查看硬件平臺、軟件版本、系統運行時間、系統手冊如何重啟、交換機序列號、內存等。 process 查看系統進程運行情況，以此判斷系統運行負載情況。 configuration查看系統運行的配置。 memory用于檢查系統空閑內存數量，了解資源使用情況。三、端口，若不正常檢查是否是物理鏈路原因。查看端口狀態 show port Slot/Port detail 例如：[local]jnhlse01show port 1/1 detailethernet 1/1 state is Up Description : toplmgsr(2/2/1)Line state : Up Admin state : UpLink Dampening : disabledUndampened line state : UpDampening Count : 0Encapsulation : dot1qMTU size : 1500 BytesNAS Port Type : Speed : 1 GbpsDuplex mode : fullMAC address : 00:30:88:01:8a:adMedia type : 1000BaseLXFlow control : onLink Distance : 10000Loopback : offActive Alarms : NONE查看端口流量 show port counters Slot/Port例如：[local]jnhlse01show port counters 2/1Port Type 2/1 ethernet packets sent : 13670443121 bytes sent : 7320556180215 packets recvd : 17210531570 bytes recvd : 11224655525023 send packet rate : send bit rate : （157M的發出流量） recv packet rate : recv bit rate : rate refresh interval : 60 seconds四、路由l 擴展ping （測試可達性）[local] se800ping [local] se800ping ? WORD IP address or host name to PING X:X:X:X::X IPv6 Address to PING ancp ANCP ping Send GSMP OAM message atm ATM ping