無損檢測磁粉檢驗工藝規程(已修改)
2024-11-06 21:45 本頁面
【正文】 更多免費資料下載請進： 好好學習社區 ****** Co.,Ltd. 焊縫檢驗規程 3 Rev.:0 Page:1 of 7 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION 磁 粉 檢 驗 操 作 工 藝 規 程 CONTROLLED 在控本 □ UNCONTROLLED 非在控本 □ COPY NO 副本編號： PREPARED BY 編制： DATE 日期： REVIEWED BY 審核： DATE 日期： APPROVED BY 批準： DATE 日期： 更多免費資料下載請進： 好好學習社區 ****** Co.,Ltd. 焊縫檢驗規程 3 Rev.:0 Page:2 of 7 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION DEMONSTRATION CERTIFICATION This is to certify that this procedure has been demonstrated on a test specimen with known defects to the satisfaction of the Authorized Inspector according to T150 of ASME Code Section V, as required by Appendix 6 of Section Ⅷ . Test Specimen No.: Demo. Report No.: NDE Level Ⅲ : AI: 更多免費資料下載請進： 好好學習社區 ****** Co.,Ltd. 焊縫檢驗規程 3 Rev.:0 Page:3 of 7 Title: PROCEDURE FOR MAGNETIC PARTICLE EXAMINATION 1. General This procedure is applied to the magic particle examination of ferromagic materials and welds for ASME Code items. The magic particle examination method is suitable for detecting cracks and other discontinuities on or near the surface in ferromagic materials. This procedure is applied to wet continuous magization by yoke, which shall only be applied to detect discontinuities that are open to the surface of the part. This procedure shall be demonstrated to the satisfaction of the AI prior to implementation. 2. Personnel The NDE personnel who engage in magic particle examination shall be qualified and certified according to ****** Co.,Ltd.’s “Written Practice for NDE Personnel Training, Examination, Qualification amp。 Certification”(No.:QCD011). 3. Description of Method In principle, the magic particle examination method involves magizing an area to be examined, and applying ferromagic particles to the surface. The particles will form patterms on the surface where cracks or other discontinuties cause distortions in the normal magic field. These patterns are usually characteristic of the type of discontinuity that is detected. The sensitivity of the magic particle examination is greatest for surface discontinuities and diminishes rapidly with increasing depth of discontinuities below the surface. Therefore, this method can only be used for detecting the discontinuities on or near the surface of the material or parts to be tested. 4. Magization Equipment and Calibration The MT equipment to be used is Yoke, with Type CDX4. Calibration of Equipment Frequency of calibration: Each
公司管理相關推薦
鄂ICP備17016276號-1