【正文】 Companies and employees must pay close attention to industrial fork trucks39。s safety. Fork trucks are dangerous equipment if they are improperly operated. Especially, fork trucks work in a narrow workplace or coworkers work in the same place. So panies must have a series of strict standards in relation to fork trucks training, operation and maintenance. All fork truck operators must have undergone both theoretical and practical training before operation of a fork truck and are required to undertake refresher courses. 1. Foreword: Note: It is everybody39。s duty to pay attention to safety 2. Instruction of Fork Truck Driver ? Worker injuries mainly because drivers haven39。t undergone formal training, or haven39。t understood thoroughly the safety regulation, or operated carelessly. ? So, our slogan is Safety First for reminding and stressing the importance of safety. ? There are many different types of fork trucks with different load capacities, but some basic operations must be plied. ? Drivers must abide by all safety regulation during working. Keep safety regulation in mind! Comply with safety regulation anytime! No excuses to breach safety! Safety regulation protects your safety and health! Safety rely on everybody39。s efforts! Basic principle: Safety First! 3. Safety Regulation of Fork Truck Driver Keypoint: Drivers must be familiar with and master each fork truck39。s operation and safety regulation before operate any industrial fork trucks. Please refer to Fork Truck Manual. Drivers must check fork trucks and report any troubles everyday before operating. Driver must report any troubles during operating. Must use the specified oil, grease and fuel which meet the manual remendation. Check Contents before operating A. Check fuel, engine oil and coolant ? Check the oil level of fuel: observe the fuel indicator on monitr, or open the tank cover or use caliper for measuring. No using lighter to observe in case of fire. ? Check engine oil: too full engine oil will increase axles39。 turn resistance so that leak oil will result in engine working improperly. So drivers must use caliper to check oil level before operating. ? Check the coolant: the level must be between full and low marks. B. Check engine and each indicators in different speeds Check engine: firstly start engine, don39。t warm engine in the idle speed, but check engine in different speed and with some loads for abnormality or not. Turn off engine before add diesel. No smoking or using lighter when repair and add oil. Prevent oil from splashing on hightemperature parts. Be care of scald when discharging engine oil ! Check Points… Only after water tank cools , open the cover (2), be care of scald. (There are some pressures in water tank) ? Check each meters: firstly start engine, run charging indicator, oil temperature alarm, engine oil pressure alarm, engine oil temperature alarm, air filter alarm, fuel oil level alarm. ? To electric fork truck: besides the above, check battery temperature alarm, carbon brush alarm, battery discharge indicator. ? Check cooling water of fuel and engine oil for leakage. Before start machine, check ground for fuel or cooling water. After start, check fuel filter and joints for oil leakage. Note: Your hands and loose clothing far away from moving and hot parts after start the fork truck. C. Check steering wheel, brake, tyres,lights, horns and wipers ? Steering Wheel: stop fork truck, turn steering wheel left/right, the turning clearance is less than 10, push steering wheel up/down for loosing or not. ? Brake: stamp on the pedal, brake can work at once, and oil circuit isn39。t leaking. ? Tyres: observe the tyre surface for abnormality, if need, use barometer for checking pressure and add gas. Check tyr