基于dht11的溫濕度監測電路設計(已修改)
2025-01-28 12:21 本頁面
【正文】 題目：基于DHT11的溫濕度監測電路設計 基于DHT11的溫濕度監測電路設計摘 要 本次設計是采用MSC51系列單片機中的AT89S51和DHT11構成的低成本的溫濕度的檢測控制系統。單片機AT89S51是一款低消耗、高性能的CMOS8位單片機，由于它強大的功能和低價位，因此在很多領域得到廣泛應用。DHT11溫濕度傳感器是一款含有已校準數字輸出的溫濕度復合傳感器，傳感器包括一個電阻式感濕原件和一個NTC測溫元件，該產品具有品質卓越、超快響應、抗干擾能力強、性價比極高等優點。設計主要包括硬件電路的設計和系統軟件的設計。硬件電路主要包括單片機、溫濕度傳感器、顯示模塊、報警器以及控制設備等五部分。其中由DHT11溫濕度傳感器及LCD1602字符型液晶模塊構成系統顯示模塊；測溫濕度控制電路由溫濕度傳感器和預設溫度值比較報警電路組成；用戶根據需要預先輸入預設值，當實際測量的溫濕度不符合預設的溫濕度標準時，發出報警信號（蜂鳴器蜂鳴）。軟件部分包括了主程序、顯示子程序、測溫濕度子程序。 關鍵詞：AT89S51；DHT11；溫濕度監測 DHT11 Temperature and Humidity monitoring circuit designABSTRACTAT89S51 is a low consumption, high performance CMOS8 bit of its powerful features and low price, it is used in many temperature and humidity sensor is a temperature and humidity bined sensor containing a calibrated digital output, the sensor consists of a resistor in the original sense of wet and a NTC temperature measurement product has many advantages, such as excellent quality, fast response, strong antijamming capability . This design is fromed by the AT89S51 in MSC51 Series and DHT11 constitute which is a lowcost temperature and humidity measurement and control system. The design includes the design of hardware circuit design and system software. The hardware has Five are a microcontroller, temperature and humidity sensors, display module, alarm and control equipment. The LCD1602character LCD module constitute the system display temperature and humidity control circuit by the temperature and humidity sensors and preset temperature alarm to the need of preenter the default value, when the actual measurement of the temperature humidity does not conform the preset temperature and humidity standards, send the alarm signal (buzzer will beep).The software part includes the main program, the display routines, temperature and humidity subroutine.Key words： AT89S51 ；DHT11 ；Temperature and humidity monitoring. 目 錄1 前 言 1 本文研究的背景及意義 1 研究任務和主要內容 1 本系統要完成任務 1 主要內容 12 設計任務要求分析 2 設計要求 2 系統組成 2 本章小結 23 硬件設計 3 單片機模塊設計 3 AT89S51單片機 3 單片機最小系統 4 復位電路 4 時鐘電路 5 溫濕度設置（按鍵）電路 6 顯示電路 6 傳感器電路 8 電源指示燈電路 10 系統的蜂鳴器電路 10 本章小結 114 軟件設計 12 溫濕度采集模塊 14 顯示模塊 15 蜂鳴器報警模塊 15 PROTUES運行結果 16 本章小結 17結論 18參考文獻 19致謝 20
黨政相關相關推薦
鄂ICP備17016276號-1