【正文】
中國石油大學(華東)現代遠程教育 畢業設計(論文) 題 目: 油氣的開采與開拓 學習中心: ********學習中心 年級專業: 網絡 **** 石油工程 學生姓名: **** 學 號: *********** 指導教師: 職 稱: 導師單位: 中國石油大學 ( 華東 ) 遠程 教育學院 論文完成時間 : 20** 年 ** 月 ** 日 中國石油大學(華東)現代遠程教育 畢業設計(論文)任務書 發給學員 1.設計 (論文 )題目: 2.學生完成設計 (論文 )期限: 年 月 日至 年 月 日 3.設計 (論文 )課題要求: 4.實驗(上機、調研)部分要求內容: 5.文獻查閱要求: 6.發 出 日 期: 年 月 日 7.學員完成日期: 年 月 日 指導教師簽名: 學 生 簽 名: 注:此頁由指導教師填寫 摘 要 在調研國內外利用水平井開發低滲透油藏的基礎上,綜合分析了低滲透油藏利用水平井開發的優越性以及目前水平井井網部署存在的問題,并通過油藏工程方法、數值模擬手段、經濟評價原理,優化設計出一套適合低滲透油藏水平井井網布置的方法,主要包括直井與水平井聯合井網的井網密度優化。 對十井網形式及井網參數的優化,設計了不同 井網系統參數與儲層參數的組合方案,包括水平井與直井注采井網形式的合理匹配、水平井段方向與裂縫方向的合理匹配、注采井排距與水平井段長度的合理匹配等,并通過各種組合關系所預測的采油速度、累積產量、含水、采出程度等開發指標進行衡量,最終獲得最佳的注采井網形式、水平井段方向、水平井段垂向位置、井排距等參數的最優組合方法。 關鍵詞 :低滲透油藏,水平井,井網密度,井網,裂縫,數值模擬 In the research of domestic and international use of horizontal wells in low permeability reservoir based on, the prehensive analysis of the low permeability reservoirs using horizontal well development superiority and the horizontal well pattern deployment problems, and through reservoir engineering method and numerical simulation method and principle of economic evaluation, optimization design a set for low permeability reservoir horizontal well pattern arrangement method, mainly including straight wells and horizontal wells bined well pattern well spacing density were optimized. Of ten well pattern and well spacing parameter optimization, design the different well pattern parameters and reservoir parameters bination scheme, including horizontal wells and vertical wells injection production well work in the form of reasonable matching, horizontal direction and direction of fracture of reasonable matching, injection and production well row spacing and horizontal section length of reasonable matching, and through various associations predicted production rate, cumulative production, water cut and recovery degree such as the development of indicators to measure and, ultimately, the best injection production well pattern, horizontal direction, horizontal well vertical section to the location, spacing and row spacing parameters such as the optimal bination of. Keywords: low permeability reservoir, horizontal well, well pattern density, well pattern, crack, numerical simulation