產品安規設計之要求與測試（ppt54頁)-文庫吧
2025-01-01 03:16 本頁面
【正文】 時不小心觸及任何具危險電壓的裸露的零件 , 除非此零件接至限電流電路 , 否則此裸露零件 應予以覆蓋或加保護殼 , 以防止維修者不小心 碰觸 . Building Networks for People 安規主要設計要求 2. 位於設備之外與外電源間之?dāng)嗦伏c(diǎn) , 應避免操作者觸碰到而遭致設備內 主電路的電容器放電而產生電擊危險 . 故要求放電時間常數不可超過 1 秒 ( 若電容量小於 則無此項要求 ) . 此測試稱為 “ Capacitance Discharge Test “ Building Networks for People 安規主要設計要求 3. 吸水性材質 , 天然橡膠 , 具石綿物質 , 不可作 為絕緣物使用 . 絕緣物是否據吸水性 , 可由 Humidity Test 及 Electric Strength Test 決定 . Temp. : 20 ~30℃ Humidity : 95%177。3% Period : 48 Hours 然後做 HiPot Test Building Networks for People 安規主要設計要求 4. 距離要求 (絕緣 ) Secondary Primary D B O TNV B(S) D B(S) D : Double( Reinforced) S : Supplementary B : Basic O : Operational(Functional) Building Networks for People 安規主要設計要求 5. 防火等級 : 945V, 94V0, 94V1, 94V2, HF1, HF2, HB, HBF Internal Plastic Part Material flammability rating minimum 94V2 Enclosure flammability rating minimum 94V0 Building Networks for People Building Networks for People 依 Input Power Rating +6%, 10% 來作為測試的範圍 . 100240V, 5060Hz, 1A = 測試點為 90V/ 50Hz 及 60Hz 254V/ 50Hz 及 60Hz If the rated voltage is 230V single phase or 400V three phase the tolerance shall not be less than +10% and 10% 判定 : not exceed the rated current by more than 10% under normal load. 1. Input Test 安規主要測試要求 Building Networks for People 1. Input Test Building Networks for People 適用情形 : 有開孔之外殼 A. 上蓋之開孔 i) not exceed 5mm in any dimension. ii) not exceed 1mm in width regardless of length iii) be so constructed that direct, vertical entry of a falling object is prevented from reaching such bare parts by means of trap or restriction.(如下圖例 ) (圖例 ) EX: 左圖之綠色虛線部分不可超過５ mm 2. Accessibility Test : Building Networks for People B. 側邊之開孔 a. not exceed 5mm in any dimension. b. not exceed 1mm in width regardless of length. c. 開孔位置適當 , 並在其 5176。 角範圍內 , 無具危險電 壓零件存在 . 投影 5176。角範圍的定義 (如下頁附圖 ) 2. Accessibility Test : Building Networks for People 以類似百葉窗的開孔方式 , 使其 5176。角的投影範圍內無危險電壓零件 2. Accessibility Test : Building Networks for People C. 底部之開孔 因目前廠內許多產品皆是共用 case, 在 safety st
范文總結相關推薦
鄂ICP備17016276號-1