信號波形產生與濾波電路設計電子技術等專業畢業設計畢業論文-文庫吧
2025-01-03 14:11 本頁面
【正文】 波、高通濾波及帶通濾波電路，本設計是基于二階帶通濾波電路的一個中心頻率為10KHZ的濾波電路。 關鍵字:遲滯比較器；二階無線增益帶通濾波電路；中心頻率Abstract Square wave generator in the science and engineering experiment has wide application, and at the same time in the life of the digital equipment, home appliances, electronic toys, and many other areas also have demand. Square wave signal is a kind of application of the signal, it is widely in scientific research, engineering education and the use of the production practice and is very popular. It is usually used as standard signal, used in electronic circuit performance test or parameter measurement. In addition, in many tester are required in the standard square wave signal detection some physical quantities. Produced by square wave circuit can hysteresit parator and R C, basic circuit structure, by 555 the timer add some resistance, capacitance of a peripheral device. Filter circuit is also in electronic circuits also have larger applications, such as people tend to get a specific frequency of the signal, but the actual input contains various frequency signal, would then use with the corresponding filter circuit to filter the frequency of the signal don39。t need and keep that people want to frequency signal. Constitute the filter circuit with low pass filter highpass filter, and bandpass filter circuit, the design is based on secondorder bandpass filter circuit of a center frequency for 10 KHZ filter circuit.Key words: hysteresit parator。 Second order wireless gain bandpass filters circuit。 Center frequency第一章 緒論 設計目的由于在課堂上學習的都是一些純粹的理論知識，沒有在實踐中得到檢驗，始終無法令人信服。本設計基于對濾波電路的基礎上對信號處理做了一個簡單大設計，可實現當輸入一個方波時，輸出同頻率的正弦波，完成方波到正弦波的轉化，通過設計可以將所學的電子技術知識運用到實際上，加深對濾波電路、方波產生電路的理解，鍛煉自己的動手能力，培養團隊合作精神。 設計內容（1） 了解信號波形的產生于濾波電路的基本原理；（2） 完成信號波形的產生與濾波電路（設計并分析計算單元電路，對元器件進行選型）；（3） 繪制信號波形的產生與濾波電路電路圖；（4） 組裝調試濾波電路；（5） 進行實物檢查，設計答辯并完成設計報告； 設計要求（1） 設計遲滯比較器方波產生電路，頻率為10KHZ可調；（2） 設計一個有源濾波器，經濾波電路得到的正弦信號幅度峰峰值達到6V以上；（3） 設計2個雙電源電路：正負5V和正負12V； 設計進度安排此報告將按照如下思路進行展開描述：第一章主要介紹系統的總體設計與方案的論證；第二章主要介紹各單元模塊的電路設計與相關參數的分析計算；第三章重點介紹個單元模塊的調試、仿真及相關的分析、結論；最后是總結和有關的參考文獻。第2章 系統總體設計 方案的設計與選擇 （1） 方波產生電路 方案一：用MAX0832集成芯片產生所需的方波，可靠性好，穩定性好，但經
黨政相關相關推薦
鄂ICP備17016276號-1