某家用電器公司0905設備管理控制程序-設備管理-閱讀頁
2025-06-28 14:12本頁面
【正文】 l and submit it to the maintenance personnel. At receipt of the Job Bill, the maintenance personnel shall assign proper repairman to make repairs. After pleting the repair, the operating department shall make an inspection. If the repair proves acceptable, the troubles will be recorded in Equipment History Sheet. 維修保養 Maintenance amp。計劃?rùn)z修：一級保養（小修），二級保養（中修）由相關部門填寫工作委托單交設備維修人員維修，三級保養（大修）可由 制造部設備科 托外修理。 The scheduled repair shall be done during the idle time as planned. The repair that needs technical knowhow beyond the capabilities of the maintenance personnel can be outsourced. However, inspection and acceptance must be made at the pletion of the outsourced repair. c. 檢測設備的檢修 Repair of Inspection Equipment 由質量部委托專門維修儀器儀表的單位修理，驗收時需質量部參加。 For critical equipment used in special processes, it is necessary to properly shorten the periods of the 1st and 2nd Level maintenance and increase the frequencies. 設備封存和報廢 Equipment Cocooning amp。 The department that is to cocoon or scrap equipment shall submit its application and fill the Application Form for Equipment Cocooning amp。 The Equipment Section of Manufacturing Department shall investigate the equipment in respect to its use year, current status and use values, and then submit the application for scarping. The equipment can be scrapped subject to the approval of the GM Office. 設備備品備件管理 Management of Spare Parts 備品備件的儲備定額， 應以滿足修理需要和不積壓為原則，制造部設備部門制訂備品備件的最小儲備定額，并根據儲備定額和實際儲備情況，制訂《設備備件清單》，組織自制或采購以達到最小儲備量，保證需要及時提供備品備件，尤其是關鍵設備和瓶頸設備的備件供應。 To acquire the spare parts, Material Requisition Bill must be firstly issued by the Equipment Administrator, and then be submitted to the Manufacturing Department Equipment Leader for verification and signature. After that, the spares parts can be released from the warehouse and stated in the accounting book. The spare parts must be properly stored in the warehouse, and be prevented from distortion, corrosion or damage. 制造部設備部門對所有設備建立檔案，設備檔案可包括設備資料、運行情況，維護保養記錄、完好狀況以及設備狀態匯總情況。 repair records, availability status and equipment status summarization. 設備控制要求 Equipment Control Requirements 關鍵和特殊過程設備的設備完好率應達到 98%，其他生產設備完好率須達 95%以上。 Calculation of availability rate: on monthly/hourly basis (availability rate = monthly scheduled operating hours – unscheduled shutdown hours) / (monthly scheduled operating hours) x 100%. 由制造部設備部門負責設備編號，并在設備上附設備銘牌進行標識，對于關鍵和特殊過程設備必須進行明確標 識。 Acceptance Record” AICQ/QR090404A 《設備備件清單》 AICQ/QR090404 A “List of Equipment Spare Parts AICQ/QR090405A 《年度設備維修保養計劃》 AICQ/QR090405A “Annual Maintenance am
公司管理相關推薦
鄂ICP備17016276號-1