【正文】 can be turned out into information system. That will meet the organization’s operating requirements. Operational feasibility aspects of the project are to be taken as an important part of the project implementation. Some of the important issues raised are to test the operational feasibility of a project includes the following: Is there sufficient support for the management from the users? Will the system be used and work properly if it is being developed and implemented? Will there be any resistance from the user that will undermine the possible application benefits?This system is targeted to be in accordance with the abovementioned issues. Beforehand, the management issues and user requirements have been taken into consideration. So there is no question of resistance from the users that can undermine the possible application benefits.The wellplanned design would ensure the optimal utilization of the puter resources and would help in the improvement of performance status.. Economic FeasibilityA system can be developed technically and that will be used if installed must still be a good investment for the organization. In the economical feasibility, the development cost in creating the system is evaluated against the ultimate benefit derived from the new systems. Financial benefits must equal or exceed the costs.The system is economically feasible. It does not require any addition hardware or software. Since the interface for this system is developed using the existing resources and technologies available at NIC, There is nominal expenditure and economical feasibility for certain.Chapter 4SOFTWARE REQUIREMENT SPECIFICATIONThe software, Site Explorer is designed for management of web sites from a remote location. INTRODUCTIONPurpose: The main purpose for preparing this document is to give a general insight into the analysis and requirements of the existing system or situation and for determining the operating characteristics of the system.Scope: This Document plays a vital role in the development life cycle (SDLC) and it describes the plete requirement of the system. It is meant for use by the developers and will be the basic during testing phase. Any changes made to the requirements in the future will have to go through formal change approval process.DEVELOPERS RESPONSIBILITIES OVERVIEW:The developer is responsible for: Developing the system, which meets the SRS and solving all the requirements of the system? Demonstrating the system and installing the system at client39。s location after the acceptance testing is successful. Submitting the required user manual describing the system interfaces to work on it and also the documents of the system. Conducting any user training that might be needed for using the system. Maintaining the system for a period of one year after installation. . FUNCTIONAL REQUIREMENTS:OUTPUT DESIGN Outputs from puter systems are required primarily to municate the results of processing to users. They are also used to provides a permanent copy of the results for later consultation. The various types of outputs in general are: External Outputs, whose destination is outside the organization. Internal Outputs whose destination is with in organization and they are the User’s main interface with the puter. Operational outputs whose use is purely with in the puter department. Interface outputs, which involve the user in municating directly with OUTPUT DEFINITIONThe outputs should be defined in terms of the following points:167。 Type of the output167。 Content of the output167。 Format of the output167。 Location of the output167。 Frequency of the output167。 Volume of the output167。 Sequence of the outputIt is not always desirable to print or display data as it is held on a puter. It should be decided as which form of the output is the most suitable.For Example167。 Will decimal points need to be inserted167。 Should leading zeros be suppressed.Output Media:In the next stage it is to be decided that which medium is the most appropriate for the output. The main considerations when deciding about the output media are: The suitability for the device to the particular application. The need for a hard copy. The response time required. The location of the users The software and hardware available.Keeping in view the above description the project is to have outputs mainly ing under the category of internal outputs. The main outputs desired according to the requirement specification are: The outputs were needed to be generated as a hot copy and as well as queries to be viewed on the screen. Keeping in view these outputs, the format for the output is taken from the outputs, which are currently being obtained after manual processing. The standard printer is to be used as output media for hard copies.INPUT DESIGNInput design is a part of overall system design. The main objective during the input design is as given below: To produce a costeffective method of input. To achive the highest possible level of accuracy. To ensure that the input is acceptable and understood by the user.INPUT STAGES:The main input stages can be listed as below: Data recording Data transcription Data conversion Data verification Data control Data transmission Data validation Data correctionINPUT TYPES:It is necessary to determine the various types of inputs. Inputs can be categorized as follows: External inputs, which are prime inputs for the system. Internal inputs, which are user munications with the system. Operational, which are puter department’s munications to the system? Interactive, whic