【文章內容簡介】 (Continued) 期望（續） ? List of remended actions and lessons learned is incorporated in the process (continuous improvement). 將列出的“建議措施”和學到的經驗和并在過程（持續改進）中。 ? PokeaYoke has been used in addressing corrective actions. 制定糾正措施中使用防錯方法（ PokeaYoke）。 161 APQP Status Reporting ProcessProcess FMEA Checklist 過程 FMEA 檢查清單 Process FMEA 162 APQP Status Reporting ProcessMeasurement System Evaluation (15) 測量系統評價（ 15） This element assesses the variation of the measurement system, and determines whether it is acceptable for monitoring the production process. 本要素評估測量系統的變差，確定是否可以接受測量系統監控生產過程。 163 APQP Status Reporting ProcessExpectations 期望 ? Correlation standards are reached and agreed to with the customer for duplicate gauges or test equipment. 已達到相同的測量或試驗設備的相關標準和顧客的批準。 ? Gauge instructions and visual aids to ensure appropriate use of gauge and test equipment in production. 測量指導書和目視輔具確保在生產中適當的使用測量和試驗設備。 ? All measurement systems (gauges and test equipment) must be modified to reflect the latest engineering part level before the Production Trial Run. 在產品試生產前必須修改所有測量系統（測量和試驗設備）以反映最新工程零件等級。 164 APQP Status Reporting ProcessExpectations (Continued) 期望（續） ? The user/customer must be given the opportunity to review and concur with the gauges and test equipment study results before the Production Trial Run. 產品試生產前使用者 /顧客 ,必須有機會評審和批準測量和試驗設備研究結果。 ? The Measurement System Evaluation must be repeated and approved following all gauge and test equipment modifications. 所有測量和試驗設備更改后 ,必須重新進行測量系統評價并獲得批準。 ? The Production Control Plan must align with the Measurement Systems Development plan. 生產控制計劃必須配合測量系統開發計劃。 ? Gauge Repeatability and Reproducibility studies must be conducted on all measurement systems. 所有測量系統必須進行量具重復性和再現性研究。 165 APQP Status Reporting ProcessMeasurement System Evaluation Checklist 測量系統評價檢查清單 166 APQP Status Reporting ProcessPreLaunch Control Plan (16) 試生產控制計劃（ 16） This is a description of the dimensional measurements and material/functional inprocess tests or checks that occur after prototype builds, but before full production 對發生在樣件制造后，全面生產前的尺寸測量、過程中材料 /功能試驗或檢查的描述。 167 APQP Status Reporting ProcessExpectations 期望 ? Legitimate/appropriate inspection sample sizes, frequencies, control method, etc. inclusive to prelaunch phase of production are included. 在生產的試生產階段包含合理 /適當的檢驗樣本容量、頻率、控制方法等。 ? All product process characteristics for prelaunch control plans are identified and reviewed. 確定和評審試生產控制計劃的所有產品和過程特性。 ? Results from the PBCP and DFMEA provide the outline for the PreLaunch Control Plan. PBCP 和 DFMEA 的結果提供了試生產控制計劃的概要。 ? The Production Control Plan for the current production model is used to assist in the development of the PreLaunch Control Plan if APQP Elements 8 and 13 have not been initiated. 如果 APQP 要素 8 和 13 還未啟動，使用當前生產模式的生產控制計劃協助開發試生產控制計劃。 168 APQP Status Reporting ProcessPreLaunch Control Plan Checklist 試生產控制計劃檢查清單 169 APQP Status Reporting ProcessOperator Process Instructions (17) 操作工過程指導書（ 17） ? This element describes the details of the controls and actions that operating personnel must perform to produce quality products. 本要素描述操作人員為生產質量合格的產品所必須執行的控制和措施的詳細情況。 ? These instructions are divided into two major ponents: 這些指導書分為兩個主要部分： ? Description of the process 過程描述 ? Operator instructions 操作供指導書 170 APQP Status Reporting ProcessExpectations 期望 ? A pleted Operator Process Instructions package. 完成的整套操作工過程指導書。 ? Instructions developed to be used during a production trial run to ensure the process performs as intended. 在產品試生產中使用開發的指導書以確保過程按預期執行。 ? Operator Process Instructions describe all process steps necessary to produce a quality product. The training instructions must include: 操作工過程指導書描述了生產質量合格的產品所需的所有過程步驟。培訓指導書必須包括： ? Detailed instructions 詳細的指導書 ? Visual aids 目視輔具 ? Any other quality materials necessary to support the production operator 支持生產操作工所需的任何質量材料 171 APQP Status Reporting ProcessOperator Process Instructions Checklist 操作工過程指導書檢查清單 172 APQP Status Reporting ProcessPackaging Specifications (18) 包裝規范（ 18） This element describes the design and development of the enditem shipment packaging, including interior partitions. 本要素描述產品最后出貨包裝的設計與開發，包括包裝內部的分隔配置。 173 APQP Status Reporting Pro