【正文】 ime_to_disbuffer(void){ unsigned char i,j=0。//比較匹配中斷，溢出中斷 //adc_init ADMUX=0X20。 if(time[1]==Min[30]) { m=0。 OCR0=0X15。 } time_to_disbuffer()。 if((m==1)||(V!=V_Table[8])||(a=0X15))//倒計時 { if(PWMnum123) { PWMnum=0。 TCNT0=0X00。 PORTC=position[i]。 Y=(T%60)。 ADNum=ADNum+1。包括電源、控制電路、采樣電路、手機充電接口、計算機控制系統。2）用LED顯示電池的剩余充電時間。而且，生產的手機的電源端口將統一為適用于標準充電器的規格。但實際上，由于現在的手機電池多采用鏗離子電池或鎳氫電池作電芯，對充電器的電壓、電流特性及安全保護有很高的要求。關鍵詞：手機充電器、智能、工單片機控制ABSTRACT One mobile telephone cell charger is necessarily to a mobile telephone intelligent charger on microcontroller can charge for all mobile telephone paper introduces the conition of mobile telephone cell the basis of analysis to the condition,this paper build a intelligent charger for all mobile telephone meet the requirement of mobile telephone cell,the author selects high performance hardware and designs stable and reliable hardware of the system is introduced detailedly including data acquisition circuit,control circuit,power supply,interface between the system and the people,the core of the system,is introduced more software design is mainly of the software system have been analyzed general aim of the software system is to realize reliability,stability,safety and the author designs the whole framework of the system with the thinking of software according to the objectoriented programming principles and technologies to implement the detailed design and coding. Keywords:moble telephone cell charger intelligent based on PIC16F877 40Pin FlashBased 8Bit CMOS Microcontroller課題背景隨著社會的快速發展，手機越來越成為人們生活中不可或缺的一部分。重點闡述了系統的軟件設計，首先對控制軟件進行需求分析，總體目標是實現系統的可靠性、穩定性、安全性和經濟性?，F(xiàn)在市場上發現有一些假冒偽劣手機電池便攜式充電器。雙槽形充電器除了具有慢速充電、快速充電、放