摘要塑料拉手注塑模具設計(更新版)
【正文】 the work piece and manufacturing and process. As the production is really plex, we design the mould as one mould and one atrium. In this paper, we also discuss the manufacturing process. Keywords inject, the configuration of mould, manufacturing process, produce project 目 次 1 引言 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 1 2 產品工藝 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 2 3工藝方案及設計方法 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 3 ┉┉┉┉┉ ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 3 設計方法 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 4 4模具結構設計草案 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 5 型腔布局以及分型面選擇 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 5 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 5 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 6 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ ┉┉┉┉ 11 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 15 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 17 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 22 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 23 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 24 5 結論 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉25 6致謝 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 26 7參考文獻 ┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉┉ 27 附錄 :工程圖 1 引言 模具行業是一個高新技術密集型，而且又重視經驗的產業。模具標準件應 用更加廣泛，品種有所擴展。用 Pro/E軟件在對零件進行受力分析，以及運動分析、干涉檢查。為保證產品質量，塑件的制作擬采用注塑成型。 為保證產品質量，塑件的制作擬采用注塑成
研究報告相關推薦
鄂ICP備17016276號-1