【正文】 ment, thus pleting the coal loaded with coal movements. Support fixed institutions Support institutions fixed by the former support, and stabilize the column and Baojin device ponents. Charging for work, installed on the rack by the front of the former roadway in support of support on the floor, installed in the rear of the racksupporting stability in the tunnel roof, installed in the rack below the fuselage will be installed Baojin And the chute together to ensure that the fuselage will not move around and dumping. operating agencies Institutions run by walking the track and chute walking institutions. Walk the track body is designed for ease of transport machinery, to gauge the track for 600 mm. Chute body is to facilitate the running machine at work on the mobile chute designed. Charging machines at work, riding on the 40 t Liuzi the chute, the bucket will face rake with the loaded coal chute, Liu Zi will Meiyun to face. Chute run institutions from operating motor, take the initiative to round, driven round ponent. Walk through a gear motor slowdown will force the initiative passed round, thus realizing the machine forward and backward. The work pressure of motor running 12. 5M Pa. hydraulic system Hydraulic valve block from the hydraulic system, hydraulic piping and other ponents, cantilever stretching, lifting, rotating, the machine running, the winch, and so on are positive and hydraulic valve block to control. 4. Charging for the work process Scalable cantilever loaded coal principle of the work shown in Figure 2. As with coal at work to be powered by the emulsion medium, it also needs pumping stations equipped with a set of emulsion. Charging the work carried out before mencement emulsion pumping station will be installed near the coaltodoor opened on the appropriate location, operation of the institutions supporting fixed machine fixed, and that is to start working with coal. Figure 2 scalable cantilever with the work principle of coal First of all cantilever will extend to the appropriate length and height, lightload operation of winch will rake bucket of coal Meidui pulled down with coal, and then operated heavy winch will rake will fight back loaded coal chute, it is so cycles, until Coal will Zhuangwan. The plane loaded with coal for the coal in front of the 8 270 mm, about 5 850 mm, height 4 500 mm. 5. Underground industrial test Scalable cantilever with the coal industry underground test in the Jincheng Coal Industry Group of Phoenix Mountain coal mine recovery, in 3314 Southface position, seam thickness of 6. 32 m, bulk density 1. 5 t246。 Coal。 3) loaded with coal coal scope than the original scope of Coal, increased resource recovery。 The average ground pressure: MPa。 倉房開采 。由于三級臂嵌套于二級臂內、二級臂嵌套于一級臂內 , 在二級伸縮乳化液缸的作用下 , 懸臂可實現伸縮動作 , 伸縮量為 3 670mm～ 8 270mm。耙斗是容積為 的裝煤容器 , 由乳化液絞車拖動實現往復運動 , 從而完成裝煤機的裝煤動作。行走馬達通過一級齒輪減速 , 將動力傳給主動輪 , 從而實現機器的前進、后退。 可伸 縮懸臂式裝煤機的井下工業性試驗在晉城煤業集團鳳凰山礦 3314 南回收煤柱放倉工作面進行 , 煤層厚度 6. 32 m , 容重 1. 5 t246。總之 , 機器運行基本達到了設計要求。主要技術參數如下 : 技術鏟斗容積 : 。 額定牽引力 : 20 kN。風扇電機功率 : kW。 圖 1 ZMC 30 側卸式裝煤機的優點 (1) 通風良好 , 主要表現在風筒不易被煤擠壓 , 掉落 , 始終保持風流正常 , 瓦斯不超限。 5) 作業安全 , 可顯著減少在危險區內的裝載作業 , 搬動物料