外墻外保溫施工方案(通用版)(存儲版)
【正文】 。加強工序檢驗和控制工作，每一道工序完成后，均由專職技術負責人員組織進行驗收，絕不將質量隱患帶到下一施工工序。其他做法同飄窗做法票窗上下底采用30mm擠塑板保溫，其他做法同。因此，該處基底性能完全滿足使用要求，無須進行加強處理。s interests above all the principles to deal with personal problems. In the specific work safety supervision in the execution is not strong, in the implementation of the decision to deploy the discount, make choices, engage in work, the implementation of the agreement, unfortable is not performed, open or disguised to resist, the lack of subject consciousness of the party organization, the lack of resist in society all kinds of bad habits and unwholesome tendencies of courage Gas and courage. Such as the liability insurance of safe production work, individual leaders that have someone arrested, and no funding, not in the global chess perspective to the countryside to carry out daily inspection, found none of my business acceptance of the resumption of production in an armchair, with a pen, indifferent. Corrective measures: (LED Leadership: Luo Mingjun, rectification time: before September 25th, insist for a long time) 1, to strengthen the sense of responsibility, work to solve the lack of decent occupation explain away, conduct problems. To establish the overall concept, eliminate departmentalism. Strict assessment and accountability, to solve the spiritual slack, nianqingpazhong, status quo, To establish and perfect the muddle along and other issues. Bureau staff conduct work regulations, standardize the behavior of personnel. 2, strengthen the responsibility system. One is the indepth study and implement the Hunan provincial Party and government leading cadres Interim Provisions on the work safety of a pair of (Hunan Office issued 2013 。在我們以往的試驗中，對加氣混凝土的材料進行過針對性試驗。（下窗臺及側口做法同） 在A軸墻面3軸線PC1拐角窗做法示意如下： PC1窗為拐角窗（如圖），會產生因墻面保溫而遮掩窗戶問題，所以在窗墻連接處安裝60mm小柱，另側墻面用30mm擠塑板替代55mm聚苯板，降低保溫厚度，同時加輔框。設立項目組人員，組成如下項目經理施工員技術員材料員安全員質量控制：施工前由專職技術負責人進行書面的技術交底明確工藝做法、節點要求、質量標準。b、粘結劑選用住總技術開發中心KE2膠與干混料配制而成的聚合物砂漿。兩次間隔不得超過4小時以上，以免形成空鼓脫離。標定位置后用電錘打眼，使用100cm長錨釘，伸入結構層4cm，放置盤片，插入帶脹塞套管的錨固釘，鋪設鋼絲網，塞入墊片，擰緊，使鋼絲網緊繃，懸浮在保溫板表面，距離板面5～6mm?？照{孔洞等預先裁好，留出位置。從首層開始，每隔一層安裝托架，托架間隔一塊苯板長度。f）施工前和施工中，應按《建筑工程飾面磚粘結強度檢驗標準》JGJ 11097的規定進行檢測。a）墻面設計應考慮設置伸縮縫，并“用柔性防水材料嵌縫”?！币?guī)程在設計基本規定中提出了幾個注意問題：①使用過程中因溫度變化引起的收縮變形，往往是造成外墻飾面磚起鼓、脫落的主要因素之一。ε θ3其次，要拔起瓷磚，還有克服試件周長乘以砂漿厚度這個面積上的砂漿剪切強度。不僅在地處寒冷地區是如此，而且在地處嚴寒地區也是如此。具體做法是分別選哈爾濱、北京、珠海、河南四省市作試件實測統計分析，使之滿足《建筑氣候區域劃分標準》GB50718的氣候特征要求。c）收縮縫表層填充彈性密封膏吸收變形。項 目規程要求實測值粘 結 力MPa（kN/m2）抗 剪（1
公司管理相關推薦
鄂ICP備17016276號-1