挖掘工作裝置設計外文翻譯-其他專業(存儲版)
【正文】 。 OITDS系統涵蓋整個挖掘機和卡車車隊。 礦業（西摩和威廉姆斯， 2021） GPS技術在高精度 GPS機指導作用，現在可以定位在 50毫米一桶一鏟或一個推土機的刀片。 準確的選擇性開采礦化視野 2。 本科畢業設計 （外文翻譯） 題 目 挖掘工作裝置設計 譯文 作者：杰克 GPS 鍬鏟挖掘機鏟斗的高精度制導系統的挖掘機（西摩， C）的應用，還列舉了以下優點： 1。隨后 Thiess安裝指導系統的其他三個挖掘機在網站中。它有 15個容量范圍從 8到 14立方米， 85噸容量的50輛卡車和 30 輛卡車 120噸的卡車挖掘機的車隊。 B）播種機。 detailed postaccident safety analysis。這直接影響著軌跡控制的方法和精度；另外，液壓缸本身的摩擦力在對鏟斗的軌跡控制中也是不容忽視的，而精確地得到該摩擦力也有一定難度。這種具有優先式壓力補償作用的閥，稱為優 先閥。 In addition, the hydraulic cylinder itself friction in the trajectory control of the bucket can not be ignored, and accurately the friction also has some difficulties. Some outside scholars using a nonlinear modeling method, and have achieved good results, but both the control system itself or its controller design process, in general more plex, a large part of the workload are concentrated in the control algorithm itself theoretical derivation and to implement the greater the difficulty, high cost, but also affect the reliability of the system, so they need a reasonable modeling of the system. Over the past decade, the general trend of development of the hydraulic excavator is to improve the reliability and efficiency, reduce costs, continue to the development of largescale miniaturization。s main control valve function type can be divided into opencenter load sensing system (opened center load sensing system, OLSS) and closed center load sensing system (closed center the load sensing system, CLSS), the median function (open, closed) resulted in a different form of the load sensing control system. diversion control methods and more sensitive system to perform a Load 16 J include: (1) based on the priority pressure pensated shunt control The concept of priority pressure pensated in 1969 by J. D. The A11, ell, the specific method is still to achieve a maximum speed of the actuator (such as hydraulic power steering, etc.): For the case even in the prime mover speed is very low or loads, in order to ensure that its flow to it than the high priority, and allows each actuator in the pump displacement is insufficient according to the priority from low to high order to reduce the speed. Such a priority pressure pensated the role of valve, called the priority valve. Composite operating system with priority pressure pensated, it is possible to produce a low priority execution to stop working. In order to lower priority execution does not stop even in the case of a serious foot pump output flow movement, and sometimes need to weaken the priority of this pressure pensation. This pressure differential pressure across the variable orifice pensation. (2) pensation based on the split ratio adjustable pressure shunt method In some machinery like hydraulic excavators need to make each actuator speed to maintain a certain ratio to ensure that the coordinated action of all actuators, can not be in the actuator attach priority.
公司管理相關推薦
鄂ICP備17016276號-1