engel+robot-預(yù)覽頁
【正文】 in front (L1) 1 = before ejector in front (Takeoff point) 3 = on the movingin point 1 Switch on sucker be the first Takeoff program Movingin with ejector in front When switch is on ”O(jiān)n”, ejector forward is already enabled at the start takeoff Movingin with ejector in front be the first Takeoff program Movingout as soon as monitorings of parts OK When switch is on ”O(jiān)n”, on the ”Takeoff point” ”Takeover time” is not necessarily waited for, but is already moved out as soon as monitoring of parts OK Movingout as soon as monitorings of parts OK be the first Takeoff program Movingout without ejector position testing When switch is on ”O(jiān)n”, it is moved out on the ”Movingout point 1” despite the ejector position Movingout without ejector position testing be the first Takeoff program Takeoff stroke correction Option Correction of the takeoff stroke corresponding to the mold actual position Takeoff stroke correction be the first Takeoff program Mold set position ”A” position for takeoff stroke correction Mold set position be the first Takeoff program Mold actual position ”SFx” mold position for takeoff stroke correction Mold actual position be the first Takeoff program Takeoff stroke difference Displays difference between mold set and actual value Difference is corrected by Xaxis Takeoff stroke difference be the first Takeoff program Takeoff areas MIN/MAX Takeoff area is limited with these parameters From these parameters work area blocks 0 5 are calculated Takeoff area MIN Takeoff area MAX be the first Takeoff program Takeoff time Time from the start point up to the movingout point 2 Takeoff time be the first Takeoff program Total time Takeoff time, depositing time and back again to the start position Total time
教學(xué)課件相關(guān)推薦
鄂ICP備17016276號-1