【正文】
wer using in the test.3. Test summary. 測試環境. 硬件環境:服務器: Sun Netra 240兩臺存儲: EMC DMX800一臺HBA卡: SUN QLA2310F 卡. 軟件環境:Cluster軟件: Sun Cluster u3卷管理軟件: MP1, MP1多路徑管理軟件:EMC PowerPath . Sun 測試項目測試過程測試結果備注Sun Cluster手工切換測試 Cluster從db1主機切換到db2主機hz_db1scswitch –z –g oracle –h hz_db2切換成功2. 將Sun Cluster從db2主機切換到db1主機hz_db2scswitch –z –g oracle –h hz_db1切換成功將Sun Cluster一臺主機reboot, 然后切換測試,觀察Cluster是否正常切換hz_db1reboot在db2上:hz_db2scstat觀察Cluster是否切換到hz_db2上切換正常切換時間: 1minSun Cluster一臺主機關電重啟, 然后切換測試1. 將db1主機關電重啟,觀察Cluster是否切換到db2將db1主機強行關電重啟在db2上:hz_db2scstatCluster正常切換到db2切換時間: 1min. EMC DMX800 插拔光纖測試測試項目測試過程測試結果備注DMX800 存儲插拔光纖測試,觀察I/O讀寫在db1上,拔掉一個HBA卡的光纖輸入:Hz_db1iostat –xn 3Hz_db1powermt watch拔掉光纖后, iostat輸出沒有數據,表明光纖拔掉后,I/O中斷。 Internal Auditors.This document is controlled electronically and any hard copy should be considered uncontrolled.The latest version of this document may be obtained from the PDS ID UTSISZRD2002xxxx.This document is owned by Manager / Author.Keywords:The purpose is for searching docs in PDS.Abstract:This document describes the template of Generic Project Document, will be the same with the Document during Ra