模具術語中英文對照資料-全文預覽
【正文】 ented mold that moves the tread segment in and out. 上蓋Transport Bushing A replaceable sleeve welded horizontally in the outer diameter of the cone ring for mold handling.Tread Rib The detail in the tread of a mold that makes the groove in the tire one piece)花筋Tread Ring The cast tread portion of a 2 piece mold (GT) 見 ADDiameterThermoChannel Slot A groove, usually located in the bottom plate, use to guide wires through for Thermocouples. 導向條SMO (Segmented mould operator) The kit to rework a press for a segmented mold 鋼片（嵌入式），也稱Blades or KerfsSipe Tab The portion of the sipe that is buried in the mold. also: Pennant area, Buttress area (GT)活絡模具SemiContainer Container without segment shoes (profile segment and segment shoe are bined In花紋塊和滑塊一體的模殼Shim ring The removable ring on the top of the cone ring that allows for shims to increase or decrease Preload徑向行程S Diameter (GT) See: DS 2Diameter 見 Centering RingPT100 Hole A hole in one segment or the bottom half of a two piece mold to accept a PT100 feeler. 預加載Press Drilling Any bolt holes to attach the mold/container to the press 模具內腔：形成輪胎外型的模具內部曲線Mold Register The taper at the . of a 2 piece mould that aligns the mold concentrically 微型氣孔套：（ mm）Mini Vent (MV) A removable insert for vent holes (Dia.: 0,6 mm) 側板字體圖. 也叫Sidewall engraving Maxi Vent (GT) Vent Sleeve A removable insert for vent holes (Dia.:1,33 mm) to be trimmed. 保溫套Integral type mechanism A mold (tread area) and mechanism that are one unit豎縫間隙： 20176。DS 2Diameter The junction diameter between the sidewall plate and the tread segments or tread ring and mould back cavity (EU)。DEVA類耐磨板：石墨青銅金屬，用來制作活絡模具的耐磨板（自潤滑）。 鋼圈的公稱直徑, 也叫Heel diameterDecoupler Rib A narrow rib that runs circumferentially around the mold and is located near the shoulder area also: mechanism (GT) also: Actuator ring, Squeeze ring (GT) 青銅耐磨板(油潤滑的)Casting An unmachined cast metal tread ring or SegmentBreaker Hook Guide PieceA block bolted to the breaker hook that aligns the tread segment with a slot in the bottom container plate. 模殼底座Bottom Container Plate Lifting Lug A lug attached to the
公司管理相關推薦
鄂ICP備17016276號-1