焊接材料質量管理規定-全文預覽
【正文】 aterials。 Exterior inspectionCheck and make sure the exterior of welding materials is uncontaminated, free of any defect that occurs during storage or transportation and is likely to affect welding quality, and that their identification marks are clear and fast and consistent with actual conditions of the products. Composition and performance testIf necessary, welding inspection shall undergo reinspection in accordance with technical requirements or corresponding tests as required in relevant standards or supply agreement. Approval of inspection resultsThe methods and rules for inspection of welding materials shall be generally determined in accordance with the requirements of relevant standards and classification society rules. If necessary, such methods and rules may be determined through negotiation by the buyer and the seller.After acceptance inspection of welding materials, an inspection report shall be issued, subject to approval by relevant functional departments. Inspection markEach package of accepted welding materials shall be properly marked.6 入庫存放焊接材料的庫內可根據需要，劃分為“待檢”、“合格”及“不合格”等區域，各區域要有明顯的標記。 檢驗結果的認可焊接材料的檢驗方法及檢驗規則一般應根據有關標準，船級社規范要求確定。 包裝檢驗檢驗焊接材料的包裝是否符合有關標準要求，是否完好，有無破損、受潮現象。 特殊焊接材料，或有特殊技術要求的焊接材料，應按焊接主管人員指定的供貨單位采購。 對業主規定有特殊要求的項目，要根據業主的規定要求修訂具體項目的管理規定，并監督執行。GB/T51171995 《碳鋼焊條》 GB/T51181995 《低合金焊條》 GB/T9831995 《不銹鋼焊條》 GB/T9842001 《堆焊焊條》 2. Normative referencesThe following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard.At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.GB/T51171995 Carbon steel electrodesGB/T51181995 Low alloy steel electrodesGB/T9831995 Stainless steel covered electrodesGB/T9842001 Hardfacing electrodes for shielded metal arc weldingGB/T 13814—92 《鎳及鎳合金焊條》GB/T 15620—1995 《鎳及鎳合金焊絲》GB/T149571994 《熔化焊用鋼絲》 GB/T81101995 《氣體保護電弧焊用碳鋼、低合金鋼焊絲》 GB/T100452001 《碳鋼藥芯焊絲》 GB/T174931998 《低合金鋼藥芯焊絲》 GB 4242—85 《焊接用不銹鋼絲》GB/T52931999 《埋弧焊用碳鋼焊絲和焊劑》 GB/T 13814—92 Nickel and nickel alloy covered welding electrodesGB/T 15620—1995 Nickel and nickel alloy wires for welding rodsGB/T149571994 Steel wires for melt weldingGB/T81101995 Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steelGB/T100452001 Carbon steel flux cored electrodes for arc weldingGB/T174931998 Low alloy steel flux cored electrodes for arc weldingGB 4242—85 Stainless steel wires for weldingGB/T52931999 Carbon steel electrodes and fluxes for submerged arc weldingGB/T124702003 《低合金鋼埋弧焊用焊劑》 GB104332002 《電弧螺柱焊用園柱頭焊釘》 GB/T48422006 《純氬》 GB/T60521993 《工業用二氧化碳》 HG/T25371993 《焊接用二氧化碳》 CCS 規范 材料焊接部分DNV 規范 材料焊接部分ABS 規范 材料焊接部分GL 規范 材料焊接部分BV 規范 材料焊接部分LR 規范 材料焊接部分GB/T124702003 Lowalloy steel electrodes and fluxes for submerged arc weldingGB104332002 Cheese head studs for arc stud weldingGB/T48422006 Pure argonGB/T60521993 Commercial liquid carbon dioxideHG/T25371993 Carbon dioxide for welding purposeCCS Rules for materials and weldingDNV Rules for materials and weldingABS Rules for materials and weldingGL Rules for materials and weldingBV Rules for materials and weldingLR Rules for materials and welding3 職責 設計部根據各項目的特點和要求制定材料準備單。本標準適用于焊接生產中，上述這些焊
環評公示相關推薦
鄂ICP備17016276號-1