cisco配置案例∶多區(qū)域和nbmaospf-全文預覽
【正文】 IS summary, L1 ISIS level1, L2 ISIS level2 ia ISIS inter area, * candidate default, U peruser static route o ODR, P periodic downloaded static route Gateway of last resort is not set , 1 subs O IA [110/74] via , 00:02:28, Ether0 , 6 subs, 2 masks C , Loopback0 C , Serial0 C , Ether0 O [110/74] via , 00:02:53, Serial0 O [110/74] via , 00:02:53, Ether0 O E2 [110/20] via , 00:00:00, Ether0 P1R4 第五步：在邊界路由器上，使用 show ip ospf neighbor 命令驗證 OSPF 的鄰居。哪一個網(wǎng)絡類型是幀中繼接口使用的。 P2P No No P2P 10 你的路由器輸出應該與下列類似： P1R1sh ip os int Serial0 is up, line protocol is up Inter Address , Area 0 Process ID 1, Router ID , Network Type NON_BROADCAST, Cost: 64 Transmit Delay is 1 sec, State DROTHER, Priority 0 Designated Router (ID) , Interface address No backup designated router on this work Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5 oobresync timeout 120 Hello due in 00:00:25 Index 1/3, flood queue length 0 Next 0x0(0)/0x0(0) Last flood scan length is 1, maximum is 1 Last flood scan time is 4 msec, maximum is 4 msec Neighbor Count is 1, Adjacent neighbor count is 1 Adjacent with neighbor (Designated Router) Suppress hello for 0 neighbor(s) Serial1 is up, line p
試題試卷相關推薦
鄂ICP備17016276號-1