2x600mw鍋爐主要施工組織設計方案-全文預覽
【正文】 and unloading works. CC1400/250t 履帶吊性能表 (SWSL 塔式、后配重 40t 工況 )主附臂 (主臂角度 85186。 auxiliary jib,72+36m, max working radius 42m,load 27t。 ponents (crane body height 102m , length of jib 60m). (2) 250t 履 帶吊 250t Crawler crane CC1400/250t 履帶吊為鍋爐主吊機械，采用 SWSL 塔式工況，后配重 40t，主臂角度 85 度：主副臂 ： 72m 加 36m；最大作業半徑 42m，負荷 27t；最小作業半徑 24m 3 時，負荷為 39t。 The Boiler shall be supplied by SEC. The boiler is all steel structural ∏ type drum boiler of a subcritical parameter, pump circulation, single reheat, single furnace balance draft, dry slagging and hypaethral placement. 1 施工場地及主吊機械 Erection site and main hoisting equipments 施工場地布置 Erection site plot 鍋爐組合場布置按總平面布置圖，組合場內布置 50t 龍門吊 各 4 臺 ， 鍋爐受熱面的大部分組合工作安排在此完成。海薩 2x600MW 鍋爐 主要施工方案 Hisar2 600MW Boiler Main Erection Plan 本期建設規模 2600MW 燃煤發電機組。 This project is 2 600MW coal fired thermal units, boiler shall be supplied by SEC. The boiler is all steel structural ∏ type drum boiler of a subcritical parameter, pump circulation, single reheat, single furnace balance draft, dry slagging and hypaethral placement. 鍋爐施工方案 Boiler Erection Plan 鍋爐為上海電氣集團生產的亞臨界參數、 強制循環 、一次中間再熱、單爐膛平衡通風、固態排渣、露天布置、全鋼構架的 ∏型汽包爐。 FZQ2020 cylindrical crane is arranged as auxiliary hoisting plants, which is designed to hoist boiler amp。 length of main amp。 Boiler heating surface ,airpreheater lifting. 、風、煤管道安裝 Flue gas,air,coal piping erection. d. 根據現場實際換工況用于大件設備的 安裝和 卸車工作。 auxiliary jib,72+36m(main jib angle of 85176。 4 frame cranes of 50t shall be arranged in Boiler structure assembly yard, employed in equipments loading and unloading, heating surface and pipe coil assembly
環評公示相關推薦
鄂ICP備17016276號-1