【正文】 e after selecting a Mold Base ? First the user must create Assembly Layout sketches of the water channel centerlines ? Can be a single or multilevel cooling circuit ? Sketches must be created for each side of the mold ? Sketches must be created at the actual zdepth in the mold for each circuit Sketch created with parallel plane to the desired zdepth in the block to place the water line 169。 UGS Corp. 2022. All right reserved. Cooling Channels ? After selecting the sketch the user enters the size for the cooling channel and selects preview ? The default extent direction (the end which the hole would be drilled from) is related to how the sketch was created ? The first point of the sketch element is the extent direction 169。 UGS Corp. 2022. All right reserved. Cooling Channels ? Extent Direction 169。 UGS Corp. 2022. All right reserved. Demonstration – Cooling Channel Next slide has recorded demo for later viewing 169。 UGS Corp. 2022. All right reserved. Place Mold Component ? The Next Select the X or Y Position in the Ribbon Bar and Select the Cylindrical Face of the Hole 169。 UGS Corp. 2022. All right reserved. Demonstration – Multi Z Cooling lines Next slide has recorded demo for later viewing 169。 UGS Corp. 2022. All right reserved. Second Project ? Second Project Insert Mold (Parting Zone and Runner) ? Creating a slider object ? Parting zone for insert Mold ? Insert patterning ? Creating a runner path ? Adding a Slide Mechanism Note: User should be familiar with topics cover in the first project in order to plete this project. 169。 UGS Corp. 2022. All right reserved. Slides ? Next define the new part as a slide, third step in the Mold Tooling toolbar ? The slide face is then automatically added to the part to create a new construction part that will be used to create the parting zone Select Slide Component Accept Selection 169。 UGS Corp. 2022. All right reserved. Parting Zone with Slides ? The Parting Zone mand will now use this new construction part when the plastic part is selected for the element blocks ? The default element set will honor the offsets defined in the preferences and will extend to the outer boundary of the slide face part 169。 UGS Corp. 2022. All right reserved. Edit Face Sorting ? Problems can occur when faces are vertical or when there are undercuts in the part. ? Mold Tooling reports this by placing an arrow beside the plastic part. 169。 UGS Corp. 2022. All right reserved. Edit Face Sorting ? It is important to hit the preview button after swapping faces to update the dialog to see if there are any more disjoint faces found ? If after previewing the result no disjoint faces are found, the Disjoint Select buttons will be grayed out 169。 UGS Corp. 2022. All right reserved. Demonstration – Parting Zone with Slide Next slide has recorded demo for later viewing 169。 UGS Corp. 2022. All right reserved. Runner Bar Support ? If the Core/Cavity Pattern is Offset in Both X and Y Directions, then the User will have the Option to Select X or Y Direction as the Main Runner Direction ? Determines Which Section of Runners will be Cut ? Options to Create on Both Injection and Ejection Sides 169。 UGS Corp. 2022. All right reserved. Runner Bar Support ? Injection Channels, Cooling Channels, and Mold Components will cut the Runner Bar 169。 UGS Corp. 2022. All right reserved. Demonstration – Integer Plate for Inserts Add a Mold Base Next slide has recorded 。 UGS Corp. 2022. All right reserved. 169。 UGS Corp. 2022. All right reserved. Reference Pattern Instance ? Reference objects of a pattern are identified by a Slightly Darker face style. ? Important for creating Ejector Pins, Inserts, Gates, etc. Assembly Sketches to position these items should be defined with respect to the Reference Pattern Instance. Use copy sketch into the reference pattern instance then hide the top level sketch. 169。 UGS Corp. 2022. All right reserved. Plastic Injection Mold Design Design Cavity and Core ? Select the core/cavity blocks, pattern type, define the X,Y spacing and optionally center the pattern. ? To reorient the elements, select the instance triad and specify the rotation angle or symmetry in the orientation step. Orientation Step 169。 UGS Corp. 2022. All right reserved. Edit Face Sorting ? The status bar reflects information about a selected face Indicates the Current Mold Side and if that Surface was Automatically or Manually (Forced) Assigned to that Mold Side 169。 UGS Corp. 2022. All right reserved. Edit Face Sorting ? Select all disjoint faces for a particular mold side with one button click, or select faces individually. 169。 UGS Corp. 2022. All right reserved. Parting Zone with Slides ? The Parting Zone dimensions step, options button provides a means to place vertical fillets on the insert blocks. To not place vertical fillets, enter a value of Zero. 169。 UGS Corp. 2022. All right reserved. Modeling the Slide 169。 UGS Corp. 2022. All right reserved. Slides ? If a Mold will require a slide, the defined workflow is to first create in place the slide face. It is important that the Slide file is stored in the project folder, if not the system will not allow you to select the Slide geometry during definition. ? Creating a shutoff surface will be necessary for thru holes 169。 UGS Corp. 2022. All right reserved. Demonstration – Using Measure and Place Part